HIOKI3560 AC micro-ohmmeter

HIOKI 3560 HIOKI 3560 AC micro-ohmmeter AC micro-ohmmeter set by Japan's production launch, the product is highly suitable for battery inspection lines, is not only used as a micro-ohmmeter instrument they can do DMM instrument. Test species adapted to the characteristics of resistance from the contact resistance and battery voltage HIOKI 3560 AC micro-ohmmeter also simultaneously measuring the resistance and voltage and compares the battery internal resistance and open-circuit voltage. HIOKI 3560 AC micro-ohmmeter basic parameters of the measuring range 30mΩ ~ 3kΩ, 6-speed range, ± 0.5% rdg, ± 8dgt (all ranges) Accuracy of the speed: at each tolerance + 3dgt fast: ± 0.5% rdg ±. 8dgt. (30mΩ) ± 0.5% rdg. ± 6dgt. (other ranges) but in fast mode, all 4-digit range display only measuring current 7.4mA (30mΩ range) ~ 1.5μA (3kΩ range) Maximum measuring voltage applications DC 60V (not allowed AC input) mode at 50Hz sampling rate: 50 times / s (Fast mode) - at 1.56 times / S (slow mode) 60Hz mode: 60 times / sec (Fast mode) ~ 1.88 times / S ( Slow Mode) shows the maximum display value 31000 (resistance), 50000 (voltage), vacuum fluorescent display measurement AC 1kHz 4-terminal measurement open terminal voltage maximum peak value 20mV (30mΩ ~ 3kΩ all ranges) Comparator function settings: on, lower limit, up to 30 sets of output: 3 files (high, medium, low) or (pass, fail), open collector, display, buzzer alarm interface RS-232C (standard configuration), GP-IB or external printer (optional) Power Supply AC 100 ~ 240V, 50 / 60Hz wide volume and weight 215 × 80 × 320 high thickness mm, 2.1kg 9287 accessory clip-test line (1), power cord (1) HIOKI 3560 AC micro-ohmmeter Options: needle test line test line 9770: for testing small coaxial needle electrodes φ1.8mm, 2 fork - between probe: 26cm, line length: 86cm needle test line 9771: for pipes and other minor substances test, the needle is 0.2m thickness, parallel angle pyramid shape, 2 fork - between probe: 26cm, line length: 86cm-clip test line 9287-10: 2 forks - between probe: 22cm, line length: 1.1m, standard accessory clip-type test line 9452: 2 forks - between probe: 20cm, cable length: 1m 4 terminal test line 9453: 2 forks - between probe: 30cm, line length: 1.1m Zero Calibration Plate 9454: When using 9461 or 9465 applications when the probe needle test line 9455,9455 are precision objects, careful attention should be used. Needle test line 9461: 2 forks - between probe: 25cm, line length: 65cm needle test line 9465: 2 forks - between probe: 10cm, line length: 1.8m remote control switch 9466 large-clip test line 9467: 2 fork - between probe: 25cm, line length: 1.1m PRINTER 9203: Numerical printing, statistical process of recording paper 9233: 10m, 10 rolls / box Cable 9425: 8989 applies to 9203-3560,2m print interface: for 9203 - 3560 PC Communicator 9588 GP-IB interfaces, note: non-CE marked products GP-IB connection cable 9151-02,2m long GP-IB 9151-04,4 m long connecting cable