GOM-802 micro-ohm meter, GOM-802 milliohms table

GOM-802 micro-ohm meter is Instek development and production of DC micro resistance meter (also known as micro-ohm meter milliohm meter, micro-ohm meter), Instek of Milliohmmeter have 2, respectively GOM-802 Micro ohm meter, GOM-801h micro-ohm meter GOM-802 micro ohm meter features. Precision up to 0.05%. Hi / Lo comparison and restrictions set percentage. Measurement of REL, Actual and% Value. Optionally automatic / manual mode. Selectable Continuous / Trigger measurement mode. Temperature Compensation and Measurement. Four-wire measurement technology to provide high accuracy measurements. Setting Auto Memory previous shutdown state. PASS / FAIL warning settings. Scan, Handler Interface (standard). RS-232C, technical parameters GPIB interface (optional) GOM-802 micro ohm meter: 30000 Counts Display Monitor Test Resistance Test current range DC 1uA ~ 1A 30mΩ, 300mΩ, 3Ω, 30Ω, 300Ω, 3kΩ 30kΩ, 300kΩ and 3MΩ 9ranges Accuracy 30mΩ:? ± 1% reading + 6 digits 300mΩ: ± 0.05% reading + 6 digits 3Ω: ± 0.05% reading + 3digits 30Ω ~ 3MΩ: ± 0.05% reading + 2 digits resolution 1uΩ temperature range 0.0 ° C ~? 40.0 ° C Accuracy 1% ± 0.5 ° C resolution 0.1 ° C operating functions Hi / Lo, Go / No-Go, Trigger,%, Diode, REL, Temp, TC Measuring Rate 7 measuring / sec at 30,000 counts; 30 measuring / sec at 3,000 counts 20 Sets Memory Interface Standard: Handler, Scan (same connector) Option: RS-232C, GPIB use the power AC 110V, 120V, 220V, 230V ± 10%, 50 / 60Hz Accessories Power cord x1, operating Manual × 1, test line GTL-108A × 1, Option: PT-100 Temperature Probe (K-Type) Dimensions and weight 251 (W) × 91 (H) × 291 (D) mm, Approx 2kg.