Japan's home HIOKI3540-02 micro-ohmmeter

Japan's home HIOKI performance micro-ohmmeter 3540-02 of: HIOKI 3540 is a low-cost version without external control interface for manual testing. HIOKI 3540-01 joined the BCD output and external control, HIOKI 3540-02 contains a printer interface, HIOKI 3540-03 contains the RS-232C interface. 4-terminal method for measuring mΩ resistor (fast 100ms response) comparator function to store up to 7 groups form a temperature compensation function, measure the temperature and the corresponding value is calculated based on copper below 20 ℃ of. 3540-03 Optional manual testing or system application testing Japan's home HIOKI micro-ohmmeter basic parameters Measuring range and accuracy 30mΩ ~ 30kΩ, 7 ranges, maximum display value 3540-02 is 3500 ± 0.1% rdg. ± 6dgt. ( 30mΩ, 3Ω range) ± 0.1% rdg. ± 4dgt. (300mΩ, 30Ω ~ 30kΩ range) measuring current 100mA (30mΩ, 300mΩ range) ~ 10μA (3kΩ, 30kΩ range) Maximum applied measurement voltage DC 3.5mV (30mΩ range) ~ DC 350mV (30kΩ range) sampling rate 16 times / s (fast mode), 4 times / s (slow mode) Response time 100ms (fast mode), 300ms (slow mode) display shows the maximum value of 3500, LCD measurement 4-terminal measurement largest open terminal voltage 4.0V (30mΩ ~ 30kΩ all ranges) digital input / output (-01-02 and -03 version) TTL output BCD, or other external control input / output compare function settings: on The lower limit or reference values ??and percentages for resistance testing, up to 7 groups of settings Output: 3 levels (high, medium, low), open collector, LED display, buzzer alarm interface to an external printer (-02 models), RS-232C (-03 models) Power supply LR6 (AA) or R6P (AA) × 6, or 9445 AC converter, (9V, 1A) wide volume and weight 215 × 61 × 213 high thickness mm, 900g, 1kg (-01, -02, -03) Accessory Clip test line 9287 (1), temperature probe 9451 (1), Fuse (1), pincers (2), an external connector socket (only for -01 type)