East Japan 15BTG torque tester torque meter children's toys safety testers

Standards: ISO 8124 Test Method: Any child may be bitten thumb and index finger to grab projections or teeth toy parts or elements of the test should be carried out on the toys. Reasonable test position fixed toys, using torque test jig test object clamped. For applying torque or torque wrench clockwise 0.45N m Guests 0.02N m torque to:?? A) from the original position has been rotated 180 degrees, or b) have reached the torque required. To exert maximum torque angle or maximum requirements within 5s, and kept 10s. Torque is removed, return to relaxed state test component. Counter-clockwise direction, repeat the test. Designed to secure the rod or rods assembled and rotated together may contact projection, toy parts or elements, apply fixtures sandwich the rod or rods to prevent rotation therewith. If the torque or the above components by the manufacturers use screws or according to the manufacturer's instructions with screws of toy parts, by applying a predetermined torque, if the above-mentioned loose parts, continue to exert torque has been reached under the loose; if the test component In less than a predetermined torque limit when obviously continue to rotate but not loose, it should terminate the test. If the test component to fall off, resulting in the other sample components may be clamped in contact exposed, the member shall be torque test.