CFB-01-AB

Magnetic sub-level gauge magnetic float type level gauge with intuitive display eye-catching, no power, easy and reliable installation, the advantages of low maintenance, low maintenance costs, is glass, glass level gauge the upgrading of products. It can be widely applied to liquid level detection in petroleum, chemical, power, pharmaceutical, metallurgy, shipbuilding industry, water / wastewater treatment industry Tanks, boxes and other containers. Specific types of magnetic float level scoring :( basic) (jacketed) (top mount) (liquefied type) (interface type) (anti-corrosion) Features 1. High sensitivity (to avoid the phenomenon panel painted face), wide window (for easy viewing). 2. The various liquid and high-temperature, high pressure, corrosive and explosive medium level of continuous measurement 3. monitor the level indicated in red, intuitive and eye-catching. The measuring range, the whole process of measuring non-blind. Installation and maintenance Note: To float gently, so as not to damage; to be installed in all of the display bar float adjustment is white, so as not to affect the reading. 1, the gauge must be installed vertically to ensure that the float assembly up and down movement in the body tube freely. 2, around the level gauge body does not allow the guide magnet close to or directly affect the level gauge work. 3, level gauge installed, you need to be corrected with a magnet to turn a steering column so that the zero position is shown below in red, white is displayed above zero. 4, level gauge into operation should be the first to open the lead under the tube valve allows smooth liquid medium into the main tube to avoid liquid medium with a rapid rise in the float assembly, turn failure caused by turned columns and shuffle. If this occurs after a smooth surface to be re-calibrated magnets available. 5, due to the transport process in order not to damage the float assembly, it will float assembly factory level gauge body tube removed until after the gauge is installed, open the bottom discharge flange, and then reinstall the float assembly within the main tube, one end of the heavy attention float assembly up and can not flip. If you have the float assembly is mounted within the body of the tube at the factory, in order to ensure the transport process no trick float component damage, we use soft card will float tube assembly is secured in the body, the installation can be withdrawn as long as the soft card. 6. The media situation, periodically open the drain pipe flange body wash sediment.