KORNICHE Jiajun industrial KORNICHE tower dentifrice

Shell love Manley EP2 grease Shell Alvania EP2 Grease Shell love than of EP2 grease is a high-level multi-purpose extreme pressure grease; mainly composed of high viscosity index mineral base oil and lithium complex soap thickener and contains extreme pressure , anti-oxidation, anti-wear, anti-corrosion additives. Advanced additive formulation for the grease provides excellent high temperature oxidation resistance. And can improve grease normal temperature anti-oxidation, anti-wear to class corrosion resistance, especially suitable for heavy-duty bearings in high temperature, high load conditions of use. Recommended Applications Shell love than of EP2 grease for high temperature bearings under heavy load of work, as in the following equipment: continuous casting machine, vibrating screen, excavators, bearing performance characteristics for use on roller conveyors with good mechanical stability under severe vibration conditions can still maintain long-term consistency, which can effectively protect the bearings; good resistance to extreme pressure performance, ensure excellent carrying capacity; good water resistance, even with the presence of water in an amount, able to ensure the protection of bearings; At high temperature, long life, and ordinary lithium-based extreme pressure grease phase by this product may be extended five intervals on fat; prevent parts / bearings from corrosion, greatly reducing the number of replacement bearings; unleaded and Asia Nitrate, plus the use of safety management. Typical penetration and level dropping point (℃) base oil viscosity (mm2 / s) Penetration 25 ℃, 0.1mm NLGI grade 40 ℃ 100 ℃ Shell love Manley EP2 265-295 carton 20, each 400 grams high temperature, corrosion can be prevented due to high temperature or acidification caused. 2 for the steam locomotive exhaust pipes, engine mufflers, boilers, steam pipes and other high temperature equipment. Feature: 1. Meet CNS2949 heat-resistant paint test. 2. Heat temperature: instantaneous temperature: 650 ℃ (1202 ℉); persistent high temperatures: 200 ℃ (392 ℉) 3. good adhesion to metal. Use: 1, before using surface rust, the oil and impurities to clean up. 2, if it is a very smooth surface, use a # 250-400 abrasive paper over, to ensure adhesion. 3. Shake the can (mix paint mixing tank), heard the tank ball crash, it can be used. 4, about 20 centimeters from the surface evenly spraying. 5, using multiple spray method, spray on a thin layer of 10 minutes every other, more lasting effect, color and more beautiful. 6, after use, please pour spout for a few seconds, residual paint spray nozzle end, to prevent nozzle clogging. 7, please use the following relative humidity is 80 ℃, the best results. (Rainy or humid air environment is not suitable for painting) physical property data: Adhesion: hundred grid test: ≧ 95% (standard job operations) Spraying area: about 3.0㎡ (0.9 pyeong) Heat temperature: instantaneous temperature: 650 ℃ (1202 ℉); persistent high temperatures: 200 ℃ (392 ℉)