Waterproof mortar

TD waterproof mortar (waterproof Po) This product is a powdery gray-component material, are rigid inorganic cement-based waterproof material. Divided retarding (coagulation time is about 30-90 minutes) and a gel-type two-speed (setting time of approximately 5-8 minutes). It can be used in basements, underground garage, toilet and bathroom, swimming pool, cisterns, kitchen, walls, floor surface, underground tunnels waterproofing treatment. Product Features: 1. Non-toxic, odorless, non-flammable, do not pollute the environment. 2. Easy to use, add water, stirring can be used. 3. The construction is simple, fast and safe, welcome back in the water, direct construction damp base surface, can shorten the duration and reduce costs. 4. Applicable to a wide range, can be used in large areas of ignorance water wet surface moisture treatment can also be used for surface water seepage and leakage mouth with water operations, rapid plugging. 5. The special active agent containing, permeable to water permeable matrix layer is formed. 6. excellent adhesion properties, can be combined with masonry, concrete, mortar and other materials, the base body and the waterproof layer is bonded to a solid overall, improve the anti-osmotic pressure. 7. High temperature (100 ℃); low temperature (-40 ℃); anti-aging; corrosion-resistant. Usage: 1. Primary treatment: First remove dust attached to the surface of the grass-roots, grease, and other loose material; make grassroots clean, solid, non-chalking, hollowing and sprinkler humid (saturated in water but does not appear out of water); The surface is too smooth grassroots should be properly chiseling to increase the bond strength between the base layer and waterproof layer. 2. Construction Methods: this product with water according to the ratio of 1: 0.3 into a mud paste, stir for 10 minutes, do waterproof layer on the base surface static Knife with a blade or wiping (wiping) 1mm thick syrup, and compacted; etc. After the first layer has a hardness (hand press unstamped) when scraping (wiping) a second layer thickness of about 0.8mm, the surface can brush or pen light received by row; also in second layer hardness after brushing a layer of slurry with a brush or a row of pens (gray water ratio of about 1: 0.5), and sprinkler maintenance for more than three days can be.