BWA British Bi of the original Great Lakes Floclean MC11 alkaline cleaners absolutely authentic

No. B002 Type RO cleaner specifications 10Kg brand Floclean Model MC11 color light yellow powder pH 10.0 ± 0.5 in the Great Lakes cleaner Floclean MC11 Features: Floclean MC11 is a high pH formulation designed specifically dedicated to remove organics, sludge and other similar adhered to the polyamide, polysulfone and particle film component membrane surface. This high-performance powder has the following characteristics: 1. pH10.0 ± 0.5 adjustable; 2. efficient at room temperature; 3. free of surfactant, easy to wash; 4. contain detergents, chelating agents and pH buffers . Floclean MC11 is applicable to all polyamide, polysulfone membrane and membrane components. It applies from 15 degrees to the membrane manufacturer recommended maximum temperature. Standard dilution ratio is 25 g Floclean MC11 dissolved in 1 liter of water. Great Lakes cleaner Floclean MC11 Cleaning instructions: 1. Check the cleaning tank, pipeline and security filters. Install the new filter. 2. The addition of reverse osmosis water production cleaning tank. 3. 1 liter of water 25 g MC11 ratio slowly added Floclean MC11. 4. Using a mixer or cleaning pump cycle solution to thoroughly mix the cleaning solution. 5. The solution may be heated in order to enhance the cleaning effect. 6. Do not exceed the film producers temperature limits. 7. In the film manufacturer or system manufacturer's recommended flow rate into the same direction from the water circulating the solution for 1 hour. If the manufacturer does not recommend, the following guidelines can be used as a reference. The flow rate of wound membrane membrane diameter (inches) each membrane tube (and the parallel flow) l / min (US gal / min) 423 (6) 653 (14) 891 (24) 10,144 (38) 12,204 (54) of the hollow fiber membranes Membrane diameter (inches) Flow rate (parallel direction) of each element l / min (US gal / min) 419 (5) 857 (15) 1076 (20) Great Lakes cleaner Floclean MC11 Cleaning Tips: 1. In case of serious fouling initial reflux (accounting for 15% of the volume of the cleaning tank) should be drained to prevent the deposition of solids have been removed again. 2. In multi-level systems, if each stage cleaning system works best alone. 3. If the cleaning solution becomes cloudy or discolored should drain. Each level before cleaning the system should be formulated new solution. Before restarting the machine system should be thoroughly washed with water production. Great Lakes cleaner Floclean MC11 Packing: 10KG / bag (dry). http://www.bjbeyond.net/