How do manufacturers of high-pressure plastic particles

With the plastic recycling technology continues to mature, and the market demand is also very strong, many manufacturers want to join the high-pressure plastic particles in the production process, we do a plastic particles factory http://www.laizhouxinsheng.com What do I need it? 1. supply a sufficient amount of: in a city depends on the resources you enough continuous production, meaning that you look at this material can not be received, 2. license to do: the resources and market problems are solved, and that is to do issues business licenses and formalities, 3, to buy equipment: investment of fifty thousand dollars, then you can, buy a granulator which fifteen thousand, four, five thousand dollars to buy a shredder, as if engaged in general waste After the plastic recycling may have to be cleaned of dirt, two clean, one in use, one in precipitation, is used as recycled water, 4, waste plastic classification: this solution, then the most important master classification does not classify then recovered no way. After classification techniques to master, usually when you buy the machine manufacturers will give you technical guidance, such as how to open the machine, the number of screw speed, how to set the temperature of each turn, to say the relatively commercialized it, for example, polyethylene and recycling polypropylene, these two, regardless of family, some specialized recycling PVC, that is not mixed, it must be clear.