Shandong factory direct high-temperature corrosion inhibitor

High temperature hot corrosion inhibitor manufacturers inexpensive chemical composition: high temperature film-forming agent (thiol group phosphorothioate), uses high-temperature properties of an organic amine neutralizing agent effective to inhibit corrosion inhibitor bit crude oil processing temperature (260 -400 ℃) under active sulfur (H 2S, S), naphthenic acid corrosion, is widely used to solve the vacuum distillation process high-sulfur, high-temperature corrosion-bit high-acid oil, corrosion rate is generally in ≥90%. After use concentrated or diluted to 10-20% solution diesel direct injection with a metering pump, a film of the injection volume is 80-120PPm (in liquid dollars) or so, the normal injection amount is about 20-50ppm. Injection point is generally in the middle of reflux by second place better position to prevent corrosion of high temperature, can also be imported from a preliminary distillation tower, often two, the atmospheric tower bottoms, minus one, minus two in a five-point injection, injection volume 20 -50ppm (to where the stream based on the amount). Package and store 200L iron drums, net weight 180kg / drum. According to user requirements or take other forms of packaging. Storage specifications as dangerous chemicals, away from fire.