Electronics industry cutting proofer

Japan GRAPHTEC cutting machine is widely used in the electronics industry proofing, such as: flexible circuit boards, insulation materials, special adhesive tape, backlight, membrane key switch, protective film, shielding material, Mylar, conductive tape, stickers, touch screen, etc. Unlike conventional die cutter, laser engraving machine, which is to be cut with a blade, do not open - it will not scorch yellow, appearance and Die punch out similar device can also be used to draw, indentation cut dotted line, vacuum suction cutting machine with positioning cutting function! It has the following advantages: a. Compared with the cutter: 1. When you omit proofing expensive mold fee 2. Easy to re-sample, simply modify your drawing can be re-molded, high efficiency two. Compared with the laser: 1. cutting edge of the material is not black, carbide 2 cutting relatively thin material will not burn 3. You can cut copper, aluminum foil, conductive fabric, foam, Mylar, backlight material difficult to machine materials, such as laser cutting blade 4. No high-calorie, no smoke produced, does not pollute the product, ease of use in a clean room; no glare 5. work light, radiation will not harm workers' health, 6. The price of the machine is quite safe and cheaper operating costs than laser III. Applications: 1. flexible circuit board substrate - cover film, gums 2. Membrane Switch 3. conductive fabric, 3M tape, foam of 4. 0.25mm to 1.5mm or less PET, PP material 5. 0.15mm or less copper, aluminum and 6 special adhesive tape, MYLAR 7. backlight source material: black and white glue, brightness enhancement film, diffusion film, reflective film, double sided tape, protection of film IV. Unique features: 1. Full and half off the first cut-off completed 2. ensure cutting precision of plus or minus 0.1mm 3. Also can indentation, can be cut together a complete 4. Can the drawing, the finest nib 0.2mm, Universal 0.5mm 5. having repeated positioning function; five. ES and EV introduction: (a) ES electronics industry for electrostatic adsorption cutting machine 1. The paper can absorb, no oily film covering material 2. The machine compact, space, convenient place (ii) EV is the electronics industry private static + vacuum cutter 1. Any material can be firmly adsorbed to solve the problem plagued the industry for years adsorbed 2. Reliable fixed way, so that the cutting better, get high accuracy guaranteed 3. Material same material than static 4. You can cut a little thicker cut positioning