How to print pictures of macro stability

Low winter temperatures, especially this year, is 28 years minimum winter temperature of the year. Many customers do not know how at low temperatures to do maintenance to the photo machine, photo machine increases the loss to some extent, affect the life of serious photo machine. Acer India summed up several pictures of models, for everyone to be a rough introduction. Photo machine at low temperature maintenance maintenance tips: ① Because the weather is cold, if the indoor (workplace) is relatively cold and too dry, it will have to pay attention to in peacetime place, it is best able to a larger piece of thick cloth On the cover photo machine, especially the feed slot and the paper outlet cover, and all because of the nozzle in the photo machine, if they can guarantee the cold air, but more into the pictorial space, it is possible to prevent ink droplets on the print nozzles solidification, it will easily lead to plug, resulting in decreased print quality. Next ② holding pictures of operating temperature between 15-30 degrees (photo machine normal temperature), heated to open heating, no heating or electric radiator fans buy on photo machine, and we pay attention to check even for the pipeline, if the temperature is too low hardens, it will increase the resistance to the movement of the ink vehicle, or bumping into a machine failure, we do not ignore the problem! ③ Also note that boot least once a week, pictorial machine needs to warm up at boot time and automatically head cleaning procedure (usually the amount of ink wash power consumption is small), it can be attached to the original ink on the nozzle drop discharge, to avoid prolonged stay in the droplet nozzle clogging caused. And performs a nozzle check, check out the currently effective nozzle usage, to see if there are missing lines print phenomena (phenomena are usually printed line plug lack of performance). ④ can also be opened in the usual pictures of the cover (must be in the off state), you can see there is a relatively smooth inner pictures of hardcore tap meantime, this root irons in the industry known as the guide rod, the printhead orbit Since there is lubricant on top of the guide bar done at runtime, the print job can be quickly and accurately. Due to the cold weather in winter, the lubricating oil is easily solidified, with daily use of the machine if not carried out some maintenance, such as the pictures of the cover usually always open work, so that dust and other constantly attack the guide rod, over the winter, it carriage anomalies may occur. If you want to avoid this from happening, the best guide rod in a few drops of sophisticated lubricants, and try to clear the filth left original guide bar. After the Spring Festival, ready to start when you enable photo machine, do not immediately plug in the power turned on, this is more dangerous, because the high temperature of the temperature change during the Spring Festival is easy to condense water droplets form on the surface, especially in the holiday room temperature Festival started low and indoor heating or heating of the environment should be especially careful. Acer India reminder: the aforementioned maintenance issues are broad, not for a particular model, can give you a reference, we want to help. ------------------------------- Best cost factory direct piezoelectric photo machine http://www.zzhongyin.com qq: 2233090362 15803848987 Zheng -------------------------------