Yunnan hotel intelligent room control system intelligent room control CUR hotel

1, guest enters the room: Room door, the card gallery lights automatically turn on 30 seconds, while the bathroom exhaust fan start; if guests do not card, porch lamp delay 30 seconds automatically shut down (by the Magnetic switch control). 2. Admission card function: (1) after the guests opened the door, porch lights turn on automatically, inserted room card gallery lights remain on, the room lights turn on automatically. (2) Controlled outlets automatically power, system software display different icons depending on their status cards. When guests take power when there is no card to take power indicator light flashes on the switch. Guest card to take power after the lights go out. (3) The air conditioning automatically turn the thermostat switch at this time guests can be adjusted; (4) curtain control: daytime (07:00 ---- 19:00) into the room card, the system automatically open the curtains and screens, in the case at night: (19:00 ---- 07:00) curtains and screens are to keep the original state (off). 3, service information functions: (1) Please clean the Do Not Disturb feature interlock function Do Not Disturb touch the doorbell interlock interlocked emergency call and do not disturb. (2) Do Not Disturb: in the service panel to activate "Do Not Disturb", the "Do Not Disturb" on the service panel LED indicator lights scrambling effective, when the doorbell is disabled, room control center and room service will be in the region receive this information, systems management software pop-up "Do Not Disturb" on the icon, the door signs "Do Not Disturb" indicator lights; To undo the "Do Not Disturb" state, need to press the "Do Not Disturb" switch. (3) requests to clean up: When activated "request clean-up" in the service panel, "Request cleanup" LED indicator lights that request to clean effectively, housing the control center and the regional service room will receive this information system on the service panel management software and record this information, sign on the door "Request cleanup indicator lights; To undo, press again for an" Request Cleanup "button;" Request Cleanup "and" Do Not Disturb "Interlock:" The request cleanup "is activated When the "Do Not Disturb" automatically canceled, and vice versa, "Do Not Disturb" is active, "Request cleanup" is automatically canceled (4) SOS: SOS switch mounted next to the bathroom toilet (such as hypoxia or slip when guest bath ), pressing the bathroom SOS SOS switch, the front desk computer sounds, icons, list of alarm, the staff must be lifted with special keys; SOS switch is pressed, the doorbell function failure after the switch is pressed the security department, room control centers. room service in the region will receive this information, system management software records this information in real time; (5) Check Reservations: Check switch installed in the bathroom door, pressing the switch, the front desk computer sounds, icons, lists alarm, floor staff 4 rounds will be timely, the doorbell button; door signs provide doorbell button 5, the new wind features: System Timing automatically turn on the exhaust fan every one hour five minutes, and always keep the air clean in the bathroom; guest card half an hour exhaust fan automatically turns 5 minutes 6, air conditioning control: air-conditioning thermostat thermostat with large LCD display room temperature, can be intelligent control room air-conditioning fan (high / medium / low) and the air conditioning on and the solenoid valve Close, temperature and mode (cooling / heating) guests can be set free (touch touch-tone). When there is any way to the room light is lit (except nightlights), air conditioning to run as guests of the setting mode, when the guests After pressing the master control switch, no other lighting in the room is lit, air-conditioning thermostat mode automatically (summer: constant temperature of 25 degrees), winter: heated 18 degrees) 7, curtains and screens control: Insert the card room the day after ( 07:00 ---- 19:00) into the room card, the system automatically open the curtains and screens, in the case at night: (19:00 ---- 07:00) curtains and screens are to keep the original state (OFF state) Guests also optionally curtains and screens open position, attention: curtains and screens are not always control switch 8, total control function; "total control" button is mounted on the bedside switch panel, press the master control switch system will turn off all open lamp, night light will automatically turn on, go to sleep, then press again the master control switch night light will turn off. In sleep mode, press the master control switch, the system remembers the last state of the lights turned on and allowed to continue to open Controlled socket and curtain screens are not always control switch 9, guests pull cards: 30 seconds after turning off all electric (controlled lighting and controlled sockets and curtains and screens); 10, controlled outlet: If the room has a which is controlled outlet, please specify (such as / floor lamp / desk lamp / toilet and hair shaving socket / socket boil water, etc.) 11, security detection: Detects open door and a safe state, regardless of the card to take power and No, the system software real-time monitoring door and a safe state, the opening and closing history instantly save, for query and print.