High-speed angle line, Ningxia angle line, CNC fabrication method Xin

 Drilling safety rules 1, before the operation staff induction must be job training, familiar with the product manual supply angle line, understand the structure of the machine's performance. 2, the product structure and properties of complex angle line, is a large expensive equipment, should someone special post, can not operate without a license. 3, the product of computer control, the operator should be strictly in accordance with instructions for use. 4, this product should never pressure falls below 0.35MPa, temperatures higher than 65 ℃. Temperatures higher than 45 ℃ cold water cooling system should be open for cooling. 5, the operator when the machine is working, can not be away from their jobs, due to special reasons should be required to stop and turn off the power away from the machine. 6, when the angle line of work, should be cleared of waste head, feed beans, otherwise the machine may cause malfunction blocked, affecting the machine is working properly. 7, the machine in the normal course of their work, is prohibited near the stacker angle line manufacturer, the non-operating personnel prohibited from entering the work area. 8, when the track has been rough material feed ban starting stacker unit; NC car in the clip was sent or clamp the material exits the process from the host is prohibited by pressing the button clamp lift; NC car in the raised clamp CNC automatic return when the lever angle line, non-pressing clamp down button in the middle. 9, this angle line of work, is prohibited from the front bumper through security, no special circumstances to lift the safety bar non-shearing machine before, the absolute prohibition is not lifted by the safety bar. 10, in the adjustment of the angle line replacement prefix, word box, punch, die, shear blades, blade gap adjustment, to be located guardian forbids any person not press the button. 11, the hydraulic system of the angle line of the factory have been adjusted, For the whole should be specifically trained personnel or operator to adjust. 12, the oil hydraulic system specification should be changed regularly, is strictly prohibited without the filter of the oil into the tank. 13, prohibited the private with the disk into the drive to avoid computer viruses with human computer. 14, when the angle should not be bent or twisted severely on production line processing, if the production line process, can cause stadia errors. "Demand has slowed down, overcapacity, rising costs, falling prices of the difficult situation in the short term is difficult to significant improvement. Although this industry structural adjustment, promote industrial upgrading, strong management, and strengthen the efforts and some progress, but has not been reversed margin The decline momentum this grim reality warns us: restructuring of the industry must accelerate the pace of upgrading, must work harder to improve production efficiency and reduce resource consumption "High angle line, Ningxia angle line, CNC manufactured by French Xin Xin CNC Machinery Co. Jinan law. company. Jinan law Xin NC Machinery Co. (www.jnfxsk.com) strong, credible, in Jinan, Shandong CNC machine tool industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead law-hsin NC and you hand into the brilliant, for a better future!