Supply Xi'an top brand solid wood furniture

Xi'an peak Furniture Co., a major supplier of solid wood furniture, wood bed, solid wood TV cabinet solid wood furniture made to order first at home, and so care is usually lower timber, the timber itself contains some water, so the furniture will be in production before the drying process, This point is well-known, however, have to follow a standard drying, even if the average moisture content of furniture wood moisture content and the use of regional atmospheric consistent. In the purchase of wooden furniture, especially solid wood furniture, if there is no professional tester, difficult for consumers to know whether the wooden furniture required standards. However, we can not because of the water content can not be visually manifested to ignore its importance. Because there will be differences in different atmospheric location average moisture content, and therefore, different regions of the moisture content of wooden furniture for different requirements, such as the average moisture content of the air in Nanjing is 14%, while the northern region, compared with 11.4% about the requirements specific to the furniture to the local average moisture content of between plus or minus 1, the experts told reporters. The moisture content of wooden furniture, especially a direct impact on the quality and use of solid wood furniture, low moisture content of the wood will absorb moisture from the air, causing swelling deformation furniture; and high moisture content, the furniture will be faced with the danger of cracking. In general, wooden furniture, especially solid wood furniture, its water content is preferably low moisture content than the average local air a little, for example, one to two percentage points. And in the market in Nanjing, there are many products of wood from the north, or the production is directly north and then brought back, we can imagine, the northern air is drier than the south, where the wood moisture content is lower than in the south, so the North wooden furniture, especially solid wood furniture and wood processing must be carried out strictly, and that which is facing two problems, one is the requirements of the construction technology, a cost of claims, if coordination both ultimately failed to ensure water Effective treatment rate, then south wooden furniture in northern environment and is more prone to problems. For more information, please visit: http: //www.xadfjj.com/