Bridge, one multi-effect interior latex mold

Bridge, one multi-effect interior latex mold Features 1: Effective release negative ions, clean indoor air, the degradation of harmful substances 2: It has bactericidal and bacteriostatic, stain 3: waterproof washable, water-scrubbing function excellent product About using anion generating material, KSA fouling factor and other high-quality materials using nanotechnology refined interior green paint, simple construction. Product use, widely used in various buildings interior walls, ceilings, gypsum board, MDF, wood surface protection coating line. Color: White Luster: matte scrub: 10000 Theoretical spreading rate: 8 ~ 9m2 / kg / times with water ratio: paint: water = 10: 1 to 2 new wall: the base surface sufficiently dried, moisture content below 10%, pH of less than 10. Repainting walls: remove the old paint the wall is not strong, then the sandpaper surface. Remove surface dust powder compounds and impurities, washed and thoroughly dried sufficiently. Recoat time interval: room temperature 20 ℃, 50% RH condition, primer and paint interval of at least two hours, paint and paint spaced at least 2 hours. At low temperature and high humidity drying time can be extended. Construction conditions temperature above 5 ℃, humidity before construction in the state of the environment below 85%, such as outside this range, the heating should take measures so that the ambient temperature and humidity reach before construction under state construction standards. (Painting target surface temperature above 5 ℃) temperature maintenance period (20 ℃) ??dry for at least 24 hours, an appropriate extension of low temperature and high humidity. Cleaning and painting after painting half-way stop, use water to clean the appliance immediately. Stored in the 5-40 ℃, cool, dry, ventilated and away from children's store-room, non-frost, avoid direct sunlight. Please run as soon as possible after opening cans. Under the unfinished Always use sealed storage. Please run as soon as possible after dilution. Note construction: Do not allow children or pets to enter the construction area; ventilation: use and to be dry process to ensure good ventilation, to ensure that there is a constant flow of fresh air. Protective equipment: To avoid contamination of clothing is recommended aprons, goggles, masks, gloves and other protective equipment during construction. First aid measures: accidental ingestion: If accidentally swallowed, immediately to the hospital for treatment. Eyes: If accidentally splashed into the eyes, flush with water immediately at least 15 minutes, and to the hospital. Protective measures: Avoid food, beverages and animal rations, etc. storage. Crisp handling: When paint spilled leakage, covered with a sand or soil collected and properly disposed of. Keep the lid up when transporting the transport note. When the paint spilled leakage, covered with a sand or soil collected and properly disposed of. Never paint into sewers or drains.