Fergus waterborne furniture coatings

Fergus Shenzhen Environmental Protection Material Co., Ltd. In order to meet the majority of consumers, the environment and the pursuit of a healthy home. Full attention and respond positively to national development direction of low-carbon economy; Through years of painstaking research and development, and innovation. Efforts to draw top international water-production processes and formulations; continued to well-known experts for advice, guidance demonstration. Then the actual spray test by thousands of times on various occasions to the market. It is understood that Fergus based Wood in the construction process, and organic volatiles content is almost zero. Lu per square meter waterborne wood volume was flat compared with the amount of oil Wood; project cost is 18 yuan per square meter between -20 yuan (due to the different materials vary because this data is not an enclosed terms) and construction process also paint will be more simple, general level of. Greatly reducing the construction process waste; although brushing increase the number of passes, but the construction time but will sink shorter (average surface dry 20 minutes). For the "Waterborne Wood" is the word, I believe many people will not feel strange. But the degree of understanding of water-based wood-related knowledge, it can be said to be very superficial; and because some unscrupulous businessmen misleading propaganda, leading consumers to the understanding of water-based Wood, into a misunderstanding. Compared with the traditional paint, water-based Wood currently there are still gaps in the fullness of the film, hardness, wear resistance and feel and so on, but with the development of technology breakthrough water-based Wood, water-based polyester Wood appears, no doubt solve the shortcomings of previous water-based Wood. Wood aqueous polyester itself has no smell, environmental protection, quick-drying, high hardness, the same yellow, water, heat, full clear, feel good, strong adhesion, weather resistance, easy construction, high cost, special primer and so on. Here we will fully analyze aqueous polyester Wood product itself features: (1) no smell: the water-based polyester Wood is diluted with water, with water as a diluent, are tasteless coating; (2) environmental protection: aqueous polyethylene ester having a formaldehyde-free wood, non-free TDI, free of harmful heavy metals, non-volatile organic solvents; (3) drying: the water-based polyurethane polyester Wood advanced system, so under normal circumstances, 20 minutes Table dry; (4) high hardness: Surface hard, wear-resistant, flexible film, not because of collisions white; (5) the same yellow: an aliphatic system, after years of keeping clear, transparent film; (6) Water : film waterproof, long-term flooding are not affected; (7) Heat: can withstand high temperatures, resistance to boiling water, will not leave a permanent stamp on the table hot cup white; (8) Titou fullness: fullness , clear and transparent; (9) feel good: film lubrication, not rough, non-greasy, non-stick hand; (10) strong adhesion: hardwood, softwood, plywood, plywood, bamboo and rattan surface or attached to an existing oil paint the strong; (11) Weather resistance: resistance to UV and wind and rain erosion, can be used for outdoor painting; convenience (12) Construction: The one-component aliphatic polyurethane systems, diluted with water, cleaning, leveling is good; (13) Cost-effective: less paint needed per square meter, without diluting thinner, less working hours; (14) Special to paint: the closure of the substrate, with a strong filling power and excellent properties can be polished. Wood aqueous polyester range of applications: (1) home decoration: doors, windows, cabinets, furniture, wooden floors; (2) public places decoration: hotels, offices, hospitals, schools, shops; (3) Furniture: Export furniture, children's furniture, toys, wood processing products; (4) the protection of exterior wood: wooden Chamber Court, leisure wood products, outdoor wood.