Galvanized cable bridge cable bridge specifications selected Jie Weinuo FIG Wuqing cable bridge

[Jie Weinuo Star recommendation - cable bridge] Jie Weinuo production of the cable bridge, fire cable bridge, electrostatic powder coating business, [Jie Weinuo Star recommendation -] Jie Weinuo cable bridge cable bridge design, especially for large office buildings, commercial finance , hotels, stadiums and other buildings, information point intensive, laying cable in addition to using the trench floor and wall pipe way outside, and the house in the shaft ceiling cable tray ceiling widely used to provide different direction wiring, weak systems of all kinds Category cloth placed inside the cable bridge, the best routing and installation according to the requirements, combined with the location of the building structure and air conditioning, electrical and other pipeline negotiations to be determined, the cable can not be passive and active cables laid side by side , limited conditions placement within the same bridge, the metal partition between them must be divided, leads to flat cable to avoid crossing the bridge across the floor, wall or when affected joints should be marked on the building plans to stay relevant empty and location, to avoid missing until the construction of a temporary air drilling could hurt the civil engineering structures. In order to prevent electromagnetic radiation interference (EMC), in the design of the bridge should be considered a closed bridge. [Jie Weinuo Star recommendation - cable tray] current large span cable bridge is typically assembled by the FRP profiles, suitable for power cables, control cables, lighting cables and accessories. Compared with the iron bridge, has a long life (typically the design life of twenty years), ease of installation and low cost (specific gravity is only 1/4 of steel, construction without flare, a single bridge lengths up to 8 m, or even longer), cutting easy, no maintenance and other advantages.