Supply of quality rotary vane vacuum pump piston oil-free vacuum pump manufacturer

It works the same and the general volume of the pump, stator, rotor, rotary vane, cylinders, motors and other major parts. With rotary vane rotor, the eccentrically mounted in the fixed cylinder, when the high-speed rotation of the rotor, the rotor slot four radial slide rotary vane pump chamber divided into four studios, as centrifugal force, close to the rotary vane cylinder wall to the stator into the exhaust outlet separated, cycle operation variable-volume, the suction gas discharged from the exhaust port, so as to achieve pumping purposes. Uses range of oil-free vacuum pump can be used in the following work: 1, automatic packaging line of vacuum suction to pull the column to open the bag, loading. 2, paper, printing machinery on the vacuum suction. 3, a variety of liquid into the bottle of high efficiency vacuum filling. 4, vacuum forming plastic products. 5, the surface state in a vacuum leak test. 6, cartons and bottles labeled articles Kam vacuum blower Paste. 7, vacuum suction photogravure fixed under. 8, the use of vacuum pressure differential under direct gas analysis. 9, a variety of supporting the use of pharmaceutical machinery automatic line. 10, non-magnetic parts processing folder on the use of vacuum suction cups fixture. 11, various containers leak test under vacuum state. 12, on the application of food processing machinery. 13, Western pharmaceutical vacuum distillation drying. 14, the hospital operating room vacuum suction. 15, universities, research institutes, factories and mines laboratory gas analysis, physical and chemical experiments. 16, supporting the use of various medical instruments and the like. Use and maintenance 1, should have sufficient ventilation conditions and lower than 40 ℃ ambient temperature. 2, free of dust and dirt clean place. 3, water, oil, liquid will fall to the pump. 4, not directly exposed to the sun. 5, there is enough space around the pump can facilitate inspection, maintenance, and disassembly. 6, the pump must be installed on a flat surface. 7, the best on a similar pump on hard concrete foundation installation, if no conditions, the pump can also be securely mounted on a steel or wooden rack. 8, must ensure that the pump is not because the foundation is not strong and caused a shock. 9, connecting pipes and pumps should not be too long, and less than the pump inlet diameter, affecting pumping speed, with a note to check that the vacuum connecting pipe leaks. 10, when connected to wires, wiring requirements should be noted that the provisions on the motor nameplate. Three-phase electric pump should pay attention to should be consistent with the direction of the arrow marked on the pump motor rotation direction. The structural characteristics of non-oil Direct rotary vane vacuum pump is a single-stage rotary vane vacuum pump. Used for pumping gas in a sealed container, in order to obtain a vacuum of basic equipment. Repair of the pump can be used for air conditioning, refrigeration equipment, medical equipment, suction devices, printing machinery, vacuum packaging, vacuum forming, physical and chemical experiments and small devices requiring a vacuum environment with a variety of vacuum operation. Also it can be used as a small oil booster pumps, oil diffusion pump, molecular pump, etc. before the pump to use. The pump is not suitable for pumping corrosive to ferrous metals, to pump oil from a chemical reaction gas containing dust particles, as well as high oxygen, explosive toxic gases. But can not as a transport pump (pumped from one container to another container) to use. Company Address: Dongguan City, Wanjiang Jane sandbar on the 6th Avenue Business Line: 0769-27281233 Fax: 0769-23662081 Contact: Mr. Huang mobile phone: 15989681883 QQ online consultation: 1041425756 Email: hmj@uv111.com