Controlled pump 50WFBB controlled pump priming pump manufacturers 65WFBE Shanghai

Controlled pump 65WFB-E | controlled pump | Shanghai priming pump manufacturer by Shanghai Yue Quan pump. Controlled pump, self-priming pump manufacturers Shanghai, WFB without sealing Self-suction pumps is Shanghai Yue Quan Pump Co., Ltd. (www.yuequanbengye.com) 2014 has been newly upgraded launched five, WFB without sealing controlled pump Instructions: Pump parts: (1) installation, from "drainage port" filled with rows note of media, as "the first drainage", later used without drainage. Tighten the "drainage port" fight cap. Prevent leakage and affect self-absorption. (2) WFB particles adaptation index (in mm) diameter aspiration port 50 or less 50 to 100 100 to 200 200 to 300 300 to 400 400 or more particle diameter <5 <5 ~ 8 <8 ~ 12 <12 ~ 16 <16 ~ 20 <20 ~ 25 (3) WFB type without sealing controlled pump strainer must be installed to prevent excessive inhalation of particles and damage the pump and self-priming effect. (4) prohibits the delivery of concentrated sulfuric acid when water drainage to prevent accidents resulting in personal and equipment. (5) must be checked before starting the pump shaft is flexible, with a jog mode to check whether the steering operation direction is consistent mark. (6) can not support the weight of the liquid will be sucked out of the pipeline on the pump liquid outlet flange, but should be fixed to the support frame (stent user-supplied). Pipe joints must be tight, no leakage, or affect the self-priming, flow and head. (16) "drainage port", "vent", "self-intake and exhaust system", "outdoor enclosures," "heat Importers" are connected with the mounting dimensions and system-independent. "Since the intake and exhaust means" only at high vertical lift and a fluid piping system static pressure of the water column is enabled, you do not need to enable the general process environment. (17) without sealing controlled pump is the use of a vacuum gas separation principle of self-absorption. (Except no "absolute speed requirements," the environment) as designed for use in the "speed of the fluid environment of absolute requirement" and not to expand the diameter of the pipette pump installation, otherwise it will affect the speed of aspiration.