Diesel generator factory direct prices favorably SC13G420D2 250kw diesel generator set on ..

Factory direct prices favorably 250kwSC13G420D2 on diesel generator sets Weifang Diesel generator units Technical parameters Unit Type: YM-250GF Output power: 250KW output voltage: 400V / 230V Rated speed: 1500rpm Power factor: COSΦ = 0.8 Output current: 450A Rated frequency: 50Hz Fuel Grade 0 # light diesel oil (at room temperature) Noise (LP7m): 100dB (A) diesel technology Brand / Origin: Shanghai Diesel Start mode: DC24V electric start diesel engine models: SC13G420D2 cylinders / dare mention structure: 6-cylinder rated frequency: 50Hz Cooling Method: Closed water cooling Rated speed: 1500rpm speed: 1500rpm Speed ??mode: electronic speed Inlet: Turbocharged Fuel consumption (100% load): 200-210 / kw.h Alternator Specifications Alternator Movement Materials: Copper Protection class: IP23 Exciter Type: Brushless / Brush Insulation class: H Output frequency: 50Hz routine maintenance: 1, check the rotary member bolts are loose, tighten timely; 2, check the engine oil sump plane, is insufficient, add oil; 3, check the fuel tank; 4, check the water tank; 5, check the oil, water pipe fittings; 6, check the intake and exhaust pipe and cylinder gasket seal; remove surface oil and dust, keeping the room tidy; technical maintenance :( 50-80 hours) increase in the daily maintenance of the contents of a clean air filter, replace if necessary; 2, replace the fuel filter, air filter, water 3. Check tension Check drive belts;; filter 4, for all injection nozzle, add oil lubrication; 5, replacing the cooling water two technical maintenance: (250-300 hours) the content and level of maintenance of routine maintenance the increase of 1, washing pistons, piston pins, cylinder liners, piston rings, connecting rod bearing and check for wear; 2, check rolling the main bearing inner and outer rings have no loosening; 3, removal of scale cooling water system of watercourses, mud sand; 4, remove the cylinder combustion chamber and the exhaust ports into coke; 5, check valves, valve seats, and so on with the push rod and rocker arm wear and grinding adjustment;