Wenzhou warm and cold water machine LD-1.5HP Lando temperature machine - Swimming pool Private

China after the reform and opening up to today, the world economy has so amazing rapid growth, has become the largest Asian economy and the world. Continuously improve domestic living standards, a swimming pool for household use, spa, sauna museum continued to increase, for everyone to enjoy the summer warm in winter, cool in summer to enjoy the winter, please give Lando science and technology cooperation and contact. Usage: Lando temperature machine (swimming pool machines, heating water machine) machine installed in a rugged flat ground, leave some space around, to facilitate heat dissipation and post-maintenance. 1. Connect soft / hard tube. The first stage soft / hard tube is connected to a thermostat Lando (swimming pool machines, heating water machine) inlet (IN port), and the other end connected to the pump (the IN port is connected to); the second section connected to the outlet (OUT), Connect the other end made manifold (OUT port is connected). Note: the lower the inlet (IN connection pump), the height of the outlet (OUT connection made manifold). IN terminal is connected pump (pump or three-way valve can be installed) OUT end manufacturing flow tubes. 2, power. Remove the power cord, power switch is turned to the air, Lando temperature machine (swimming pool machines, heating and water) to open the power switch, when the temperature display lights up. 3, adjust the temperature. Press the key heating / cooling key, after display flashes, the water temperature can be set using the key heating and cooling keys. After stopping set six seconds, the display stops flashing, the display jumps back to display the status of the actual water temperature setting is completed. After setting the temperature, when the temperature is below the set temperature 1/2 degrees, Lando temperature machine (swimming pool machines, heating water machine) and begun to heat, when the temperature is higher than the set temperature of 1/2 degrees, Lando temperature machine (swimming pool machines, heating water machine) began to cool. Note: 1, connect the hose to firmly. Non-lubricating oil or other organic solvents, or hose off easily, such as connection difficulties, with water lubrication. 2, Lando temperature machine (swimming pool machines, heating water machine) body can not water. Note that when you install the water pipe can not have water. Lando temperature machine (swimming pool machines, air water machines) to keep the surrounding environment ventilation flow, so that timely dissemination of heat, such as poor ventilation, heating and water will greatly reduce engine efficiency. 3, long-term use, the need to drain the water in the tank to prevent corrosion. The company also supplies these products to similar products: Pool machine, warm and cold water machine, temperature machine