Imported recycling inorganic acid resin

Recovery of inorganic acid resin bed acid retardation short recovered acid ion exchange resins Tulsion A-32 Fine mesh ISO-9001 / ISO-14001 / OHSAS-18000? "; Tough gel"; fine form strong base anion exchange resin II Type Tulsion? A-32 Fine mesh is a quaternary amine containing functional groups of the polystyrene type II architecture "tough gel" strong base anion exchange resin fine. Because of crack-free and has excellent characteristics of their own physical properties than the basic I-type resin slightly lower, and I therefore have the same resin when the degree of regeneration, the regeneration efficiency and a higher operational capacity. The main application recovery in hydrochloric acid, sulfuric acid, nitric acid, hydrofluoric acid, regeneration simply rinse with pure water recovered acid, due to its fine and short beds feature makes it possible to obtain an acid solution recovered about 15-20%, Therefore, stainless steel pickling acid recycling sugar industry and other industries widely used, and by the praise. The basic nature / TYPICAL CHARACTERISTICS Type / Type: strong base anion exchange resin / Strong Base Anion Exchange Resin structure / Matrix structure: polystyrene copolymer / Polystyrene copolymer functional groups / Functional group: quaternary amine type II / Quatemary Ammonium Type II Physics Type / Physical form: water sphere / Moist spherical beads ion type / Ionic as shipped: chlorine type / Chloride particle size distribution / Screen size USS (wet): 50 - 140 particle size / Particle size: 0.1 - 0.3mm total switching capacity / Total Exc Capacity:. 1.3 meq / ml (H +) expansion coefficient / Swelling (approx.): Cl- to OH- 12% moisture content / Moisture: 47 ± 3% pH operating range / Suitable pH range: 0 to 14 dissolution rate / Solubility: insoluble in any solvent / Insoluble in common solvents backwash settling density: 690 - 720 g / L Recommended Operating Conditions / OPERATING CONDITIONS resin bed height / Resin bed depth 600 mm (24 ") maximum operating temperature: 60 ℃ maximum flow rate / Maximum Service flow: 60 BV / hr backwash expansion space: 50 to 70% backwash flow rate: 5-10 BV / hr hydraulic characteristics (HYDRAULIC CHARACTERISTICS):? Tulsion A-32 Fine mesh Testing (TESTING): ? Tulsion A-32 Fine mesh ion exchange resin sampling and testing is based on standard test procedures, namely ASTMD - 2187 and IS - 7330,1998 package (PACKING):.? Tulsion A-32 Fine mesh Super Sack 1000 lit Super Sack 35 cft MS drums 180 lit. MS drums 7 cft HDPE lines Bags 25 lit. HDPE lines Bags 1 cft For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS / ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment. If you need more information, please contact our technical staff!