FIG Texas Hengyu hydraulic equipment, high pressure electric pump pressure electric pump

The company is composed of ultra-high pressure piston pump stations, control valves, fuel tanks, electrical, instrumentation complete an independent hydraulic pump stations of. Features: First, small size, light weight, easy to use and fast. Second, for maximum pressure of 160MPa, stop packing manual unloading of three, can be equipped with a cylinder, stretching and other tools to achieve lifting, bending, straightening, hydraulic shears, caulking removal, pressure piles job requirements. Fourth, as a variety of high pressure hydraulic components, pressure vessels, high pressure hose, pipes and pipe assembly experiments, pressure and the like. High pressure hand pump installation is correct, there is a very important impact on the normal operation and service life of the pump, you need to pay special attention to the following points: Note 1, the unit has a bolt on the base of the base and can be placed between the base wedge alignment. Note 2, equipped with flexible coupling of the pump, should ensure that the pump coupling and motor coupling concentricity. Book it concentric shimming available. Measuring two couplings with cylindrical and down, left and right, does not exceed 0.1mm. And axial clearance should be 2mm, and within a week the difference between the maximum and minimum gap shall not exceed 0.3mm. Note 3, in the actual operation of the unit was made after a final check for 3-4 hours, no adverse phenomenon is considered qualified installation. Note 4. Special Note: Before installing the pump, the pump should be carefully examined and import pipeline runner no debris (especially electricity, gas welding slag) to prevent their entry into the pump parts damage to the pump, even lighting vortex impeller blades . Resulting in flow, pressure decrease, or no flow, pressure.