Environmental protection filter installation, Qinghai environmental dust, silver-based models using the latest

Precipitator performance characteristics: 1, air inlet and outlet are integrally formed with oblique separator separates uniform air distribution, dust to dust and gas plays in advance and hindrance of Mars, to avoid direct erosion dust bag, reducing the dust concentration of dust and gas, extending the life of the bag and pulse valve. 2, the bag using high temperature bag, the working temperature <200 ℃. 3, dust sealing materials are used in high temperature materials. 4, clean blowing tube with lengthened, the pulse electromagnetic valve away from the high temperature flue gas, avoid impulse solenoid valve temperature damage. 5, bag pocket elastic expansion ring, good sealing performance, solid and reliable. 6, bag frame with rounded, reducing friction bag with skeleton to extend the life of the bag, and easy to unload bags. 7, using the upper pumping bag way, open the top door for bags, you can change the bag after extracting skeleton, improved operating conditions for bags. 8, cleaning is controlled by timing, pressure, manual control, every cleaning cycle, followed by cleaning each row of the bag again. 9, ESP outsourcing rock wool insulation, to avoid dust condensation inside. 10, the bypass air inlet valve, to prevent heat damage to the bag. 11, the installation of high temperature alarms and bag leak detection devices. Environmental precipitator works: environmental dust points positive pressure (also known as push-in) and negative pressure (also known as inhaled), according to the negative pressure type described in this specification. Refers to the dusty gas under negative pressure, by the inlet pipe into the ash bucket, at the inlet of the site has a spoiler, coarse dust by gravity into the hopper, fine particles of dust through the dust bag filter, and adsorbed on the inner wall of the dust bag, the gas purified by the clean air chamber, through the top of the device switching valve through a discharge pipe suction fan, and then the exhaust pipe into the atmosphere. Environmental precipitator works: environmental dust points positive pressure (also known as push-in) and negative pressure (also known as inhaled), according to the negative pressure type described in this specification. Refers to the dusty gas under negative pressure, by the inlet pipe into the ash bucket, at the inlet of the site has a spoiler, coarse dust by gravity into the hopper, fine particles of dust through the dust bag filter, and adsorbed on the inner wall of the dust bag, the gas purified by the clean air chamber, through the top of the device switching valve through a discharge pipe suction fan, and then the exhaust pipe into the atmosphere.