Tianjian Brilliance Figure Zircon ramming mixes

Tianjian Brilliance Henan professional production ramming mixes, improve process efficiency. Depending on the blast furnace and the design requirements of different materials, carbon ramming material is mainly used for the gap between the furnace bottom carbon brick and bottom sealing plate and hearth carbon bricks and the cooling wall, and the bottom water cooling pipes leveling and filling the cooling wall above the centerline, and all parts are required by the Carbon ramming material after ramming material has a certain strength and density, filled every nook and a small gap, to no leakage of hot metal and gas requirements, and carbon ramming mix of carbon bricks and stave performance thermal conductivity and heat of the blast furnace to stay the same, it will not affect the life of the blast furnace, thereby maintaining normal production of blast furnace. Actual production, use and maintenance of the development of the following programs: (1) The first smelting furnace, the scrap shop first with thin bottom, plus scrap to minimize the impact, the impact of the scrap is strictly prohibited heavy bottom, and two groups of former smelting Scrap is not blowing, let it melt, transmission temperature should not be too fast, and as the case may be washing furnace; (2) to take leave before 3 furnace steel operations, in order to facilitate the hearth sintering; (3) The first furnace smelting, Non buried child blowing; (4) If a part of the bottom is too much or the emergence of local scour pit, using compressed air to blow out wins at the pit, or will be divisible steel dry ramming mix vote up to pocket repair and compacting it with a rake lever, pave, you can continue to use.