Still cloud the screen map, stainless steel wide net, stainless steel wide net

When the stainless steel wide net for effect on water conservancy projects for irrigation, can effectively prevent water erosion caused by Andi bank collapse, protect the safety of full reservoir river. If there are holes online face stainless steel welding, surface porosity causes are due to stainless steel containing C, S, Si amount prone to high porosity. Its solution or replace stainless steel, or using low hydrogen electrodes slag system. Welding parts unclean also prone to porosity. Therefore, the requirements of welding parts before welding to remove oil, rust and other dirt. More stringent requirements when welding using low hydrogen electrodes. The welding current is too large. So the latter part of the electrode drug skin red, but also prone to porosity. Therefore requested to take appropriate welding specifications. In order to maximize the welding current electrode tail is not red is appropriate. Low hydrogen electrodes easy to absorb moisture, and therefore need to be baked for about one hour before use at a temperature of 350 ℃. Otherwise also prone to porosity. Wave solder joint porosity: the use of low hydrogen electrodes are often easy surface and internal porosity in the weld joints appeared and their solution: when the solder wave joints should be away from the crater 9 ~ 10mm in the forward direction at the start of the weld arc, arc After combustion, the first rod for the reverse direction back to the crater position, as fully melted and then move forward, or in the weld arc to avoid this type of blow holes. Stainless steel mesh stainless steel mesh strip bar aka stainless steel mesh belt, stainless steel wire mesh cut to a width smaller stainless steel mesh, stainless steel mesh strip main weaving plain weave and twill weave, the main specifications for the 12 mesh -300 mesh, the width of the smallest can do 10mm, the main purpose is for further processing, such as punching into mesh, producing a broken section tube network, which is ultimately applied to the filtration industry. Stainless steel I-type mesh strip is mainly used to take off the festival then using welding technology welded tube network. Welded wire mesh mesh strips: welded wire mesh strip material into stainless steel and carbon steel wire, wire diameter mainly 0.3mm-1.5mm, the main purpose of the welded stainless steel mesh is widely used in rubber, and stainless steel mesh strip melt together, and then solidified into a rubber belt hardness, resistance to abrasion, long service life; also be used for paving construction can extend the life of the building, the construction firm, without distortion. Anping Belden Wire Mesh Products Co., is specialized in the production of stainless steel wire mesh of the professional manufacturers, production of metal mesh belt mesh strips.