15 square sewage tank car tank 15 t 15 cubic plastic tanks

15 square sewage tank car tank 15 t 15 1 cubic plastic tanks, each tank entered the water, the water two holes, there are special requirements for separately. 2, roof water tanks should be placed on the force bay or platform stairs in good condition. 3, tank container for the Cape, it should be retrofitted with liquid level control float or other effective control device. 4, after assembly, close the outlet pipe and vent pipes, open into the water, turn on the water side to side to check filled with water, 12 hours watertight qualified 5, water tank should be cleaned regularly to prevent debris into the tank 6 to test the water, General conditions of use tank temperature, pressure 7, rotational tank corrosion on large-sized large-capacity bulk products have a very big advantage, despite the large volume, but only then to maintain the integrity of a molding characteristics, which is Other tanks are not the Department of Technology. 8, special requirements, under special circumstances, the customer prior to installation as telephone contact with the supplier advice carefully before installation.