Dongguan double 95 test tank factory direct Jinan double the 95 wet lab freezer

Dongguan double 95 test tank factory direct specifications / SPEC: Accuracy ± 1.5 ℃% Microcomputer PID temperature controller shelf plant floor power 220V 2.5KW220V 5KW220V 7KW model RUD-40RUD-50RUD-60 Internal dimensions (W × H × D) cm40 × 40 × 4050 × 50 × 5060 × 60 × 60 External dimensions (W × H × D) cm60 × 65 × 14680 × 85 × 15695 × 100 × 170 in the box with the internal and external material SUS # 304 stainless steel, 1.0t matte process, the shell 1.2t steel paint temperature range RT-200 ℃ (300 ℃), Dongguan factory direct dual 95 test tank structure: 1. Cold rolled steel shell spray / stainless steel liner, box doors are made of high quality silicone rubber seal. 2. insulation: rigid polyurethane fine glass wool 3. Cooling mode: binary compression refrigeration mode (water-cooled condenser) 4. Refrigerator: refrigeration compressors use 2 sets of French "Taikang" semi-hermetic compressors The main refrigeration parts are imported original, assembled into a cascade refrigeration unit. In the refrigeration piping system uses a multi-channel power control loop, we can better guarantee the achievement of the technical parameters of the chamber. 5. Heater: Stainless steel finned heater 6.IPC2000 color LCD touch-screen controller, it can display a dynamic process elevating the set running temperature curve and temperature 7. tested products still automatically guide preheating zone, room temperature, pre-cooling zone temperature shock. 8. The three-chamber container impact test program control. High temperature box / chamber / cold box according to the top down. Sample in the test chamber remains stationary. Any device (double 95 test box) no fault can not be in use, if there are problems in a timely manner the user can enjoy the service, or be able to quickly determine the fault approach based on fault diagnosis device itself has restore the device performance as soon as possible back into use. In this respect, domestic and foreign manufacturers have been or are to make positive efforts, such as a rapid response team of maintenance, such as increased diagnostic and fault warning system software in the computer control system, the user can according to information provided by computers as soon as possible deal with failure.