Hebi temperature glass flake clay construction glass flakes

 Air Spray 7043,7044 Recommended - Pressure 0.3 ~ 0.6MPa, spray viscosity 18S ~ 22S / coating used for manual processing of the substrate, then the maximum anti-corrosion life will have far less than 10 years. Paint itself should be above 15 ℃, in order to ensure the normal construction performance. The environmental temperature not higher than 35 ℃ appropriate Prohibit construction with temperature, it should be noted that freezing or freezing temperatures will make the surface will affect the paint adhesion. Coating construction should be strictly controlled and the relationship between the amount of film thickness, to meet the design requirements and / or the product instructions provided. After coating application avoid water washout within four hours. After coating deposition film uniformity should be checked, without any pinhole wrinkling or other ills, on the contrary approach should be taken to eliminate. At room temperature (about 25 ℃) maintenance seven days and put into use. Coating application inspection rules, refer to the relevant national standards and regulations. If you use 7041 + 7042 in order to obtain the strongest anti-corrosive chemical impregnation, strengthen the use of the patch, but it should consider the use of fiberglass cloth to increase the amount of material it is influential. When a fluorine-containing medium, should use polyester cloth