Supply paint room

Our paint room, low price and good quality, the user very much. The main function of  Booth  is to provide a good environment for the baking step process. The most important factor affecting the quality of the environment around the paint, such as the cleanliness of the air, temperature and humidity. Generally speaking, into the paint room of people and goods will bring pollution. Shed into the air is a major source of pollution. Only by following strict procedures for the use, reduce pollution spread, holding paint the room in good condition in order to get the best baking results. Paint room use and maintenance precautions are as follows: (1) regular cleaning room wall, floor and wall air control device to remove dirt and oil play. Routine cleaning work should be carried out after each finished baking, prepare for the next painting. (2) Do not store in the shed parts, paint, waste packaging or table, since they can accumulate dirt and ultimately affect the quality of the paint. (3) Do not in the room with sandpaper body surface, in order to avoid the impact of dust filled the air quality. All the preparatory work to be paint, such as sanding vehicle cleaning, paint, etc. should be modulated in Pengwai be possible to avoid the appearance of sources. (4) when the water washed the floor, should be prevented from splashing to the body, but to set up a sewage treatment plant. (5) For dry filtration system, must be checked periodically and replace the filter. Block paint board, should check with barometer filtration resistance daily. Stop the accumulation of excessive paint paint board, air flow resistance is increased, the flow is too slow, it will cause the room air quality deterioration and the formation over roast and other defects. Blocking paint plate must be frequently changed. In general, the dry filtration system should be the manufacturer's recommended air flow speeds can be eligible for good results. (6) the water level in the wet filter system must be in the correct working position. Use, should add one additional agent in the water. (7) Regularly check for possible leaks surrounding owned gap is sealed to prevent external dust into people hold within. (8) car before entering the room, must be cleaned. Usually hidden crack dirt dry place, the back bumper, engine room, and the bottom of the car - can not easily be found, if not cleaned the room and bring people, when baking in a strong flow, which will inevitably affect the baked dirt coating quality. It should generally be in the room for external use high-pressure air to those parts of the fixtures cleaned. (9) The accessories of the paint used, such as roasted gun, tape, paint Yao, belts, wheel sets, air conditioners, hoses, uniforms, gas masks, rags and so may Jina dust pollution, they should be stored and ventilation in enclosed storage compartment, to prevent them from falling dirt brought the human face paint layer. (10) regular fan and motor maintenance.