Supply cathodic electrodeposition coating equipment

Electrophoretic coating of pure water are higher, while the water is only one of the test items: Conductivity (μm / cm). With paint cast groove need water conductivity to reach 10μm / cm or less, to carry out the requirements of clean washing water reaches 50μm / cm or less, or more indicators of water through water equipment is required to be completed, also is manufactured raw water pure desired device. For small production, small-scale electrophoretic coating industrial water users choose to buy more economical way. Ion exchange applicable to raw water conductivity of not more than 200μm / cm, more than 200μm / cm of raw water should be chosen manufacture reverse osmosis water pure, raw water conductivity greater than 1000μm / cm should be selected reverse osmosis water pretreatment Water softening to + pure water production process is completed. Urban water conductivity can call the local water company; groundwater, water, landscape, the conductivity of the water is high, the basic need reverse osmosis water machine to complete the process water system. Texas Boyuan Environmental Protection Equipment Co. ion exchange: ion exchange technology is widely used in the field of water treatment. Such as water softening, water desalination, high water extraction, it can be used for bleaching the Food and Drug purification, heavy metals, chemical raw materials recovered. Ion exchange equipment yin and yang bed, mixed bed regeneration bed three varieties, sun bed, anion bed countercurrent regeneration using advanced technology, with a mixed bed column and cation resin regeneration within the relocation regeneration process, the regeneration bed is designed for female mixed bed resin shift operations outside regeneration process configuration, I Division also designed other types of ion exchange equipment. Second, the shower tank: Spray is mainly used before washing and after washing, is more suitable for on-site or on-site wastewater sanitation inconvenience demanding customers. At the same time need to be recovered first paint backwash down easier; while spraying structure more suitable for complex parts, work more efficient. Third, electrophoresis paint recycling machine: mainly used electrophoresis paint need to be recovered and there are strict limits on effluent users. The device not only can recycling backwash down electrophoretic paint, but also the pre-processing and post-processing of waste water for effective filtration, ultrafiltration, so as to achieve the requirements of environmental protection sewage. Fourth, the heat exchanger: it is usually used to reduce and control the electrophoresis bath temperatures due to electrophoresis in the electrophoresis process fluid to heat up quickly, or in cold weather bath temperature is too low, in order to ensure the bath temperature in the normal range inside, you should use a heat exchanger to cool down or warm bath to adjust. Fifth, ultrasonic cleaning machine: usually used to treat the oil on a small electrophoresis artifacts and artificial sweat and wax like substance, for the following products: high pre-treatment requirements; plating after electrophoresis high-end accessories, crafts; structure and appearance more complex high-end small pieces of products; high-end products, such as aluminum or magnesium! Texas Boyuan Environmental Protection Equipment Co., Ltd.