Corrosion-resistant magnesium material environmental degreasers

Corrosion-resistant magnesium material environmental degreasers process characteristics (1) removing the oxide film, the surface of the film and impurities to form a uniform layer of magnesium alloy surface clean and conducive to the formation of good adhesion of the subsequent process. (2) non-corrosive magnesium alloy substrate. (3) applies to spraying magnesium alloy or plating pretreatment. Caution When the workpiece is processed heavy oil, it should be appropriate to consider increasing the amount of magnesium alloy degreaser. After the bath for some time, with the increase in the amount of oil bath and the amount of dirt will affect the results of the bath is usually treated area 20-25m2 / L / inside, then feeding amount should be increased When after the addition of the workpiece degreasing still meet the requirements of the treatment effect, should be inverted trough or trough change process. http://www.fsrchg.com/products/meihejinxilie/show_68.html Miss Zhou: 13798694317