How old electroplating factory in Dongguan, Xin earn to find electroplating factory

Electroplating factory in Dongguan Xin earned - is described as polishing, electroplating factory in Dongguan Xin earn main projects are: polished, chrome plated, all kinds of mechanical parts. Hardware and die, screw, and other metal surface treatment; black, galvanized, decorative chrome, hot dipped zinc, heat treatment, aluminum and aluminum anodizing. The Company since its inception in 1998 to keep credibility, quality, customer satisfaction assured for the purpose, adhere to mature sense of accomplishment for the customer to make a satisfactory product. Hotline: 13332630840 Using Modified processing of flexible polishing tools and polishing abrasive particles or other media carried on the surface. Polishing can improve the dimensional accuracy or precision of the geometry of the workpiece, but to obtain a smooth surface or specular gloss for the purpose, sometimes to eliminate gloss (matte). Usually buff as a polishing tool. Buff general multilayered canvas, felt or leather stacked from the system, both sides clamped circular plate with a metal, its rims powder coated with a mixture of oil and other abrasives and polishing agents made uniform. Polishing, buff (peripheral speed 20 m / sec or more) high-speed rotation of the workpiece pressed, the abrasive on the workpiece surface micro machining and rolling, to obtain a shiny finished surface, the surface roughness Ra0.63 generally up to 0.01 micron; when using a non-greasy matte polish, shiny surfaces can matting to improve the appearance. When mass production of ball bearings, often used barreling method. Will throw a lot of balls coarse, abrasive lime and cans on the tilting drum, the drum is rotated so randomly and so the ball rolling with the abrasive collision in the barrel in order to achieve the removal of a convex front surface and reduce surface roughness purpose, can remove margin of about 0.01 mm. Fine polishing load the ball and fur pieces in barrels, the continuous rotation of hours available dazzling bright surface. Precision line scale processing surface polishing is dipped in liquid polishing carried polishing liquid by the particle size of chromium oxide powder and emulsion W5 ~ W0.5 the mixture. Buff adopt uniform fine material degreased felt fine wood or specially made, its trajectory is uniformly dense mesh, polished surface roughness of not more than Ra0.01 microns were observed under magnification 40x microscope not any surface defects. There are also methods such as electrolytic polishing. Contact: Du Haodong Mobile: 13431261128