Foshan special plating corrosion fan PVC4-72 type centrifugal fan

PVC4-72 plastic fan with polypropylene film welded plate heat, high strength, corrosion resistance, smooth operation, low noise. Widely used in chemical industry, metallurgy, electronics, textile, instruments, electroplating, schools, hotels, laboratories and other industries ventilation exclude pH harmful gases. Instructions: 1, the working temperature ≤80 ℃, gas dust <100mg / m3, the gas delivery does not contain a sticky substance and particulate matter. 2. The fan made of pure polypropylene sheet, in the transportation and installation must be light hanging light, non-hard object collision case. 3, the installation, the weight of the gas pipeline must not pressed in the fan casing to prevent deformation and damage. There is debris in the non-cabinet, hand struck the impeller to ensure that no collision phenomenon, before the inlet connected. 4, the power of the air inlet is closed, the fan can be run to confirm the accuracy of the running direction, and then slowly open the inlet valve, a predetermined condition is reached, confirm all normal rear Nengchan of operation. 5. Always check the fan operation and, if abnormal vibration or noise should immediately turn off the fan, if there is an object attached to the viscous impeller inspection and, if need be promptly removed. Ordering Information: 1, must indicate the fan model, speed, wind, air pressure, the outlet angle, rotation direction and the motor type (general motor or explosion-proof motor) when ordering. 2, supporting the wind pipe, the inscribed circle and so on. 3, bubble film or wooden packaging. PVC4-72 datasheets Machine No. Power (KW) Speed ??(r / min) Flow (M3 / H) total pressure (PA) 2.8 0.75 1400 565-1060 288-126 3.2 0.75 1450 844-1582 324-198 3.6 1.1 1450 1332 -2371393-2474 14502006-3330 501-329 1.1 4.5 2.2 1.5 14502856-4753 634-4165 14503864-6955 790-502641450 6677-12018 1139-724 1.5 9604420-7957 498-3177 7.5 1450 1550-98439 10602-19084, 607312-13161 736-468