Corrosion Inhibitor price chart GB Corrosion Inhibitor Lin Quan specializing in the production of corrosion and scale inhibitors

Lin Quan Guangzhou Environmental Protection Technology Co. specializing in the production - scale and corrosion inhibitor, cooling water security and environmental protection agents with a corrosion and scale inhibitor, corrosion inhibitor, or the role of analysis known as corrosion inhibitors and scale dispersant is its part of the molecule functional groups adsorbed by static electricity caused by dirt on the active sites of metal salts being formed crystals (nuclei) surface of the crystal growth inhibition, so many crystals kept in a microcrystalline state, which is equal to metal salts of organic fouling increased solubility in water; at the same time, due to the adsorption of the scale inhibitor molecules on the surface of the crystal, the crystal growth even, only abnormal growth, which makes the crystal distortion. Distortion of the crystal after adhesion to the metal surface is weakened, and therefore easily deposited on the metal surface. Since adsorbed on the metal surface functional group is part of the inhibitor molecule functional groups, who did not participate in the adsorption of functional groups, will be on exhibit ionic crystals, because the charge repulsion is increased and the crystal in a dispersed state. These three effects exist, so that the dose in water to prevent scale and the same amount of salt is not caused by dirt fouling metal surface required, far lower than the same amount of metal chelate cause dirt in the water so as not to precipitate the amount of chelating agent needed. They can be dispersed in water insoluble inorganic salt, prevent or interfere with the deposition of insoluble inorganic metal equipment surfaces, fouling, maintain metal equipment with good heat transfer effect, to ensure normal production. There are two properties of the molecule opposite polar groups, can be adsorbed on the metal surface cleaning monomolecular film is formed, in which both the anode deposition, but also in the cathode film. Prevent diffusion of water and dissolved oxygen to the metal surface, from the corrosion inhibition. Corrosion Inhibitor look - Guangzhou Environmental Protection Technology Co., Ltd. Lin Quan Corrosion Inhibitor - Lin Quan Guangzhou Environmental Protection Technology Co. specializing in the production, supply; Lin Quan brand quality assurance, good sales of quality indicators Appearance: yellow-brown transparent liquid Active component (EDTMPS meter)%: ≥ 30.0 organophosphorus (as PO43- meter)%: ≥ 10.0 Phosphorous acid (as PO33- meter)%: ≤ 5.0 phosphate (PO43- plan to)%: ≤ 1.0 PH value (1% solution): 9.5-10.5 Density (20 ℃) ??g / cm3≥ 1.15 ± 0.1 ※ Chloride (Cl- dollars)% ≤ 3.0 Corrosion Inhibitor Guangdong largest manufacturers in what? - Under the Guangzhou Environmental Protection Technology Co., Ltd. Lin Quan