No corrosion addition to wax water

HL- efficient, environmentally friendly, non-corrosive wax water First, the product uses and characteristics 1, penetration, dissolving ability, for a variety of waxes, wax speed; 2, the product is universal wax water, namely for not to hurt the steel and alloy matrix; 3, using low concentrations of oil capacity of high, long life, economy and durability. Second, the physical and chemical indicators Appearance: brown or yellow slightly thick liquid specific gravity: 1.02-1.03 pH value: 8.5-9.5 Third, use Directory concentration: 30-40ml / L Temperature: 70-90 ℃ (hot-dip) 65-90 ℃ (ultrasound ) Time: 5-10 minutes (hot-dip) 30 seconds to 10 minutes (ultrasound) Fourth, the preparation and maintenance 1, solution preparation: The tank water is heated to about 50-60 ℃, stirring slowly add the necessary In addition to wax water. 2, solution maintenance: solution wax effect and speed, stoichiometric or experience add water to maintain wax, when the last oil too much, replace the solution aid. V. Notes 1, due to the production process, the addition of the order; after production storage time (stored for a long time, the color will deepen) will cause the color is different, but this does not affect the use effect. 2, due to the characteristics of wax in addition to water, organic raw materials, in the case of temperature changes, the consistency will change, but does not affect the results. 3. For a tank with a variety of different substrates were when wax, should first deal with an active metal, reprocessing inert metal, otherwise the active metal surface to form a bad attachments.