Supply Xingmao TS-53 chrome chrome fog inhibitor

Our company has developed efficient TS-53 chrome fog inhibitor improved formulation exclusive use, the use of high purity imported raw materials manufacturing, which has broader use of the environment, can be used to a greater concentration and temperature range of decorative and functional chrome chromium plating solution in. Compared with similar products, chrome fog inhibiting effect is obvious, can maximize the reduction of chromium mist out caused the cost of consumption, but also helps to reduce the chrome fog inhaled long-term health damage to workers in the workshop. TS-53 chrome fog inhibitor effective in excellent water solubility, up to 100%, and can be dissolved in methylene sulfonamide acetate and other organic solvents, the appearance of almost white crystals, melting at 170 ~ 190 ℃, a high surfactant. To measure the surface tension of the aqueous solution and the apparent, per liter of water was added 250mg TS-53, so that the surface tension of water 72mN / m (i.e.,> 72dyn / cm) decreased to the maximum 22.6mN / m, relative to other fluorine-containing surface active agents, whether it is the amount and duration of the performance is the best. Xingmao TS-53 new generation chrome fog inhibitor, thanks to imports of raw materials to improve the formulation of new and high-purity, Hing Mau TS-53 chrome fog inhibitors reduce the previous generation chrome fog inhibitor in a long time to a certain extent adverse effects after use of the bath (bath scrapped cause serious or even unable to produce) of the negative effects, the performance is more superior, the effect is more stable, the probability of the risk of failure is low, more suitable for the high demands of quality manufacturers long-term use . And I produced the TS-60 fast hard chrome plating additives and TS-70 fast decorative chromium plating additive used in conjunction with, the better. A significant reduction in consumption of chromic anhydride, reduce the concentration of chromium in the operating plant pungent fog to protect the health of workers. The main applications: the field of electroplating: This product solubility in water up to 100%, significantly higher than the traditional chrome fog inhibitors such as fluorine C8F17SO2K (FC-80). For chromic acid solution (250g / L of CrO3,1% sulfuric acid at a temperature of 50 ℃) maximum reduction of surface tension up 22.6dyn / cm, enter the amount of 0.72g / L. The use of this product, enter the amount of only 0.1 ~ 0.15g / L. 2. Strong glass polishing agent glass products, especially polished glass, acid mixture if the concentration of HF / H2SO4 is relatively low, it is necessary to add a perfluorinated acid durable quality wetting agent, and polished at a relatively low temperature. Polishing glass pieces especially lead crystal glass, heating the aqueous solution of HF / H2SO4 using the technology. By grinding thus made transparent transparent glass painting, and surface finish. After addition of perfluorinated acidic wetting agent, can reduce the temperature, shorten the polishing time, improve the glass surface and reduce losses, reduce evaporation loss, while reducing the glass surface defects.