Portable multi-use tool gelcoat spray gun gun prices

I. Product Overview LB-P2002 is a portable gun compact size, easy to operate, easy to maintain, versatile gel coat resin coating tool. Second, the scope of the product according to the performance of different materials, install the appropriate nozzle, spray products can be used in the gel coat spray pattern tooling gel coat outer gel coat resin can also be sprayed paint and interior and exterior decorative paints, in particular, can spray added gelcoat polyester particles. Third, the product structure of portable gun structure is simple, there are three main parts: the gun: air control valve housing bolt spring hook; tip: nozzle ring; feeding cups: plastic cups metal lid. Fourth, the air pressure: 0.3 ~ 0.6MPa; the cup volume: 1L; nozzle diameter: diameter 2.8 ~ 8.0mm inner diameter: 0.8 ~ 6.2mm Fifth, use 1, the installation steps: (1) prepare a pressure of 8 kg displacement of 0.4 cubic meters / min air compressor; (2) to connect the trachea (via oil-water separator and pressure gauge) at the outlet from the compressor to the bottom of the joints to tighten gun that is installed; (3) Check all the joints, make sure all connectors are fully tightened. 2, methods of operation: (1) Preparation of raw materials used in accordance with performance, choose the appropriate type nozzle; check seal is intact, if damaged, replace seals shock; the nozzle and nozzle connector bolt gun body and the lid and the cup and other joints greased. (2) steps to promote good pre gelcoat, according to the amount poured into the cup, according to the proportion of added white water, and stir; cover the lid into the cup on the raw material, and pressing the lid; the nozzle align the connector is inserted into the nozzle of the gun before, until the nozzle and nozzle connector tightly together, and then the hooks for hanging at the bottom of the cup; hold grip, hold the bolt, the air ejected from the nozzle connector; gun down-dip, spray material, adjusting air control valve, the raw material to achieve the best atomization; nozzle at the mold surface can be spray production; stop spraying, will tip up, shoot machine guns at the same time, in order to avoid the raw material effluent; cleaning fluid gun tip the cup washed, coated with oil to prepare for the next use.