Aluminum die-casting aluminum cleaner Cleaner HF-601

HF-601 aluminum cleaner I. Applications: HF-601 aluminum alloy cleaning agent is used at room temperature, is suitable for all types of aluminum and high-silicon aluminum die-casting light degreasing whitening agent, can be aluminum and silica-alumina casting and oil sand blasting after aluminum oxide surface clean, especially after blasting cast better cleaning effect, non-corrosive high silicon aluminum die-casting parts, does not affect the workpiece surface finish, cleaning effect white clean, room temperature operation, environmental protection and efficient, with greater efficiency in the use of ultrasonic cleaning machines, better, it is aluminum cleaning product of choice. Second, the product advantages: 1, the goods bath preparation easy, easy to operate, easy to use and environmentally friendly and efficient, through the EU environmental ROHS certification; 2, the agent solution is quite stable, non-toxic, small skin irritation, high silicon casting aluminum non-corrosive, will not have black phenomenon, and can be recycled repeatedly, room temperature operation, energy conservation, low overall cost. Third, the operation process: workpiece onto the aluminum frame → HF-601 detergent treatment → water wash → HF-630 anti-oxidant qualities of aluminum soak → unsolicited wash → drying four instructions: No Item Usage Notes 1 HF -601 Aluminum Cleaner white translucent liquid 2 ratio 8-10% watered 3 Operating temperature Room temperature -30 ℃ 4 ultrasonic treatment processing time: 1-3 minutes soaking: 3-6 minutes 5 to use immersion, ultrasonic 6 using plastic tank cleaning equipment, PP / PVC tank or ultrasonic cleaning machine five, operation and maintenance: 1, according to a bath concentration formulated bath, stir to dissolve you can use (when equipped with tank liquid shake the bucket and then pour) ; 2, with the increasing number of processing the workpiece, and the workpiece to extend the use of time away bath and other reasons, the active ingredient and liquid bath will decline, if the surface of the oil bath is not small and dirty, timely Supplementary HF-601 aluminum alloy cleaning agent; degreasing decontamination difference if the bath is dirty, and the additional time, it is recommended to replace all the bath. 3, die-cast aluminum parts production and processing Please be careful not to be stored in damp places after a good, or likely to cause oxidation of mold, once black oxide is serious, it is difficult to wash away the moldy, because aluminum oxide mildew has penetrated the skin, To dispose of the scale, but also damage the surface, a slight oxidation product can be directly washed; 4, the use of the product shake until homogeneous product is acidic, good wear rubber gloves when handling. VI, packaging and storage: 25 kg / barrel, store in a cool place for 2 years effective.