7 mm black plastic plate - German import PPO board;

7 mm black plastic plate imported from Germany, PPO plate; samples can provide free samples; Contact: Mr. Wu (188_2312_2331) PPO polyphenylene ether resin English name; Polyphenylene oxide-usually modified physical properties specific gravity: 1.07 g / cubic centimeter molding shrinkage : 0.3-0.8% molding temperature: 260-290 ℃ drying conditions: 130 ℃ 4 小时 applications 1. Suitable for production of heat-resistant parts, insulating parts, less wear resistant parts, transmission parts, medical and electronic components. 2. Can be used for high temperature use of gears, blades, valves and other parts can be used instead of stainless steel. 3. Can be made screws, fasteners and connectors. 4. Motor rotor, chassis, electrical transformer parts. Formability 1. Non-crystalline material, moisture absorption small. 2. Poor mobility, for a similar Newtonian fluid, the viscosity is sensitive to temperature, product thickness of 0.8 mm. Easy to decompose, corrosive gases decompose. Should strictly control the molding temperature, mold should be heated, gating system for material flow resistance should be small. 3. Low water absorption of the polyphenylene ether is about 0.06%, but amounts of moisture will cause the product surface is not smooth, silver and other phenomena, it is best for drying, the temperature not higher than 150 degrees, or color change. 4. Polyphenylene ether molding temperature of 280-330 degrees, modified polyphenylene ether molding temperature of 260-285 degrees. 7 mm black plastic plate imported from Germany, PPO board; 7 mm black plastic plate imported from Germany, PPO board; 7 mm black plastic plate imported from Germany, PPO board; 7 mm black plastic plate imported from Germany, PPO board;