Corleone KRA fire retardant nylon KF-100

First, the physical properties: Appearance: White powder Main ingredients: active silicon magnesium mixture hot tin acid decomposition temperature (> 1%): 340 ℃ Second, the technical explanation: KF-100 stannate fire retardant nylon, with a very high cost-effective. Main applications replace expensive antimony trioxide flame retardant polyamide nylon halogen formulation system. In brominated polystyrene (BPS) flame retardant system, KF-100 can replace 100% antimony trioxide. In decabromodiphenylethane (Deca) system can replace 30-40% of antimony trioxide. KF-100 after a special surfactant treatment, greatly improved compatibility with plastic and adhesion, good dispersion. Add this product, you can easily reach UL94V0, but also has the following outstanding results: - Mechanical properties remain intact - good color performance - improve melt flow - a substantial increase CTI value, GWIT value of this product as polyamide flame retardant synergist, can improve the electrical properties of the material, but also improve the leakage of materials tracking index (CTI value) 50-100 volts, improve glow wire ignition temperature (GWIT) 25-50 ℃. Add specific amount depending on the material of the base material and want to achieve the requirements of the final product. Third, the recommended dosage: in brominated polystyrene (BPS) flame retardant system: It is recommended to add 7 to 9 percent in ten brominated flame retardant system: it is recommended to replace 40% of antimony trioxide with KF-100, such as can maintain the same or higher flame retardancy, antimony trioxide can replace more. Note: The specific use to consult our technical engineers, can provide some guidance formula. Fourth, Storage and shelf life: in the standard state (dry, 25 ℃) under unopened KF-100 can be stored for at least three years, to avoid contact with heat and moisture during storage. Corleone (KRA) specializing in the production of flame retardants, heat stabilizers, compatibility agents, antistatic agents, lubricants, lightening agents, fillers, etc., mainly in the service of modified plastics, paints, masterbatch, polyurethane, silicone, film, paper, metal casting, and other fields. Free to send samples, technical advice: Mr. Chen 13926847116 QQ: 344100486.