Large vertical mixer

A: Features and description; plastic mixer 1: The product raw material by the action of the spiral in the barrel stirring constantly mixing blending effect is achieved. Plastic mixer 2: Tank bottom provided with a receiving hopper another, throwing the portion of raw material received directly, then by another feeding tube directly and quickly sent back to the discharge port, mixed with the raw material, in this process interferes with the movement of raw materials, thereby enhancing the mixing effect and reduces mixing time. Plastic mixer 3: Back spout opening degree by a flapper control, operation is extremely simple, which could be mediation, so back to the material feed to achieve the best balance. Plastic mixer 4: barrel as the stainless steel or iron production. (Made of stainless steel and A3 are iron, heating and non-heating type) II: Description plastic mixer 1: before starting the first idle machine, check the machine is working properly. Plastic mixer 2: normal operation, set the mixing time (set according to different materials at different times). Plastic mixer 3: Pour the material feeding mouth (Note: Material added to Outlook section to feed the mouth, not too full) Plastic mixer 4: Stir well, to play an open spout to release the material. Three: Note plastic mixer 1: normal operation of the machine do not open the lid. Plastic mixer 2: shall maintain the operation of the machine within 2-3 months. (Upper and lower bearings can beat butter).