MGL-5 rolling wear test machine factory direct test site

A, MGL-5 rolling wear test machine Product Overview: The MGL-5 rolling wear test machine for all kinds of veneer plywood panels and a "determination of surface wear" test developed to meet the GB / T17657-1999 "panels and veneer plywood physical and chemical properties test method", the "determination of surface wear" test, the quality inspection departments at all levels and panel production enterprise ideal test equipment, can provide accurate test results for you. Two, MGL-5 rolling wear test machine Main purposes: for wood and other non-metallic surface abrasion resistance test. Three, MGL-5 rolling wear test machine main technical parameters: 1. The biggest test: 5N ± 0.2N 2. Specimen rotation speed: 60 ± 2r / min 3. nozzle from the surface: 1-2mm 4. Test pieces 1-30mm thickness can be adjusted continuously integer. Fourth, rolling wear test machine testing machine installation MGL-5 as a sophisticated testing equipment, its installation, adjustment and? Has certain requirements for the environment, in order to ensure accuracy of test results and MGL-5 rolling wear test machine to work properly. 1. The user before unpacking, you should first check box is intact. After opening the box, against the packing list and check the MGL-5 rolling wear test machine and accessories are complete after non-destructive, you can remove the test machine and vacuum cleaner. 2. MGL-5 test machine placed on a solid platform, adjust the rack below the adjusting nut so that the bubble level on the rack in the middle position. 3. MGL-5 test unit's power cord into the power supply system of indoor three-pin socket, turn on the power switch, you can test. Five, MGL-5 test machine maintenance and repair in order to MGL-5 rolling wear test machine in good working condition long service life, must regularly test machine maintenance. 1. before each test, the test pieces after the installation position, and then install the grinding wheel. 2. Replace the grinding wheel, it must be shut down to prevent damage to electrical, mechanical or injury. 3. The test weight must not exceed the maximum force test machine calibration value, to prevent damage to the motor and parts. 4. Turn off the power after the end of the trial, should wipe test machine, put away to prepare for the next use. 5. When long time without MGL-5 rolling wear test machine, periodically rotating parts into the amount of lubricating oil in order to ensure parts in good working condition. Sixth, after-sales service warranty from one year of acceptance and lifetime maintenance, all free of charge services within a year, the new machine free onsite installation, free training for operators. 1, there is provided test equipment are in line with the current national standard or industry standards, to ensure that the technology advanced test equipment reliability; 2, the required year-round supply of spare parts and accessories; 3, the product long-term technical support, product maintenance within 24 hours solutions, for the scene to resolve within 48 hours of arrival; 4, software lifetime free upgrades. The company promises: supplier sent home installation and commissioning, training of operators, one year warranty and lifetime service. Service; the machine fails, give the phone to reply within eight hours, within 48 hours sent home services. Contact: Tian Meng Mobile: 15315599818 Tel: 0531-83157169 QQ: 510124049 E-mail: 510124049@qq.com radius of the test instrument: http: //www.qlsyj.com/