Jinshan rubber and recycled rubber for special machine

Rubber regeneration, simply put, is put vulcanized rubber sulfur-sulfur bonds, carbon-sulfur bond is opened, carbon-carbon bond damage as little as possible; however, the chemical balance and energy conservation analysis point of view, is the need to destroy the energy, the energy either from various additives in the chemical reaction, either from external energy. How to find a balance of both saving and no pollution, but also to restore the rubber sufficiently regenerated. Based on this idea, Shandong Jinshan Plastic Equipment Technology Co., Ltd. in ambient temperature and pressure renewable rubber reduction, based on the development of environmentally friendly desulfurization rapid regeneration of high temperature and pressure rubber plastics machine, it does not have high temperature and pressure dynamic desulfurization cans recycled rubber exhaust exhaust pollution, there is no normal temperature regenerated catalyst recycled rubber of high energy consumption. Rubber rapid regeneration desulfurization plasticator applies not only to the tire rubber powder, also can be a variety of natural rubber regeneration restored. Rubber rapid regeneration desulfurization plasticator features fast, easy to use, small footprint, diverse use patterns, both high temperature + chemical agents, high temperature + low + activation agent can also increase the viscosity average? Evenly agent, cold + RV renewable rubber, etc., is the research and production of renewable reduction of rubber excellent equipment. With this equipment can produce ordinary reclaimed rubber, reclaimed rubber tasteless, odorless high strength recycled rubber and the like. The technical process is simple, environmentally friendly production environment, there is no waste gas, waste water generation. 1, atmospheric Safety: The atmospheric conditions of high temperature desulfurization regeneration of waste rubber powder mixed materials, doghouse and outlet ports are always open, because there is no water as the working medium, does not produce steam pressure, avoid dynamic desulfurization tank (MV) in a continuous high and low temperature environment which caused structural deformation and pressure vessel container during use insecurity. 2, yielding greater efficiency: transportation equipment powder with a diameter twin screw conveyor 200mm / 300mm, high-efficiency, large output, Nissan reclaimed rubber powder 10-20 tons. 3, energy saving and environmental protection: the production process does not add water as the working medium, avoiding secondary pollution process wastewater and waste gas treatment, while saving water, vapor phase change thermal power using electromagnetic induction heating, high heating efficiency, insulation effect, production per ton of powder desulfurization power consumption of less than 100 degrees, is a new environmentally friendly energy-saving equipment, integrated power consumption reduced by 30%. In line with the sustainable development of circular economy requires "low-carbon." 4, automatic continuous production: PLC automatic control frequency conversion motor to achieve mixing powder transport, equipped with temperature control device, automatic temperature control heating temperature, providing desulfurization desulfurization conditions during transport of waste rubber powder, rubber desulfurization Powder hollow inside and outside cooling, can solve the continuous industrial production technology requirements, easy to implement large-scale automated production. 5, stable and reliable quality: desulfurization equipment to achieve automatic control of process conditions, the long-term experiment to master the use of the equipment a mature technology reclaimed rubber formulation, stability testing and the use of recycled rubber through the production of quality and reliability. 6, screw self-cleaning: the two self-cleaning rotating spiral blade attached to the blade to clean each other viscous materials, to achieve desulfurization sulfide powder in high temperature environments, self-cleaning effect. ? 7, easy maintenance: modular equipment for the modular structure, easy installation and removal, spiral closed-loop control of rotation of the double helix can be realized in the production process from the Qing blades, rotor sealed using a special seal design and materials, it is a better solution to similar products industry helical viscose and leaks, and easy maintenance.