Huatai HT-098 insulated shoes

The so-called insulation refers to insulation material enclosing the charged body, in order to isolate or conductors of different potentials charged body so that the current to circulate a certain path. Good insulation is to ensure the normal operation of equipment and lines necessary condition, but also an important measure to prevent electric shock. Insulation materials are often also plays other roles: cooling cooling, mechanical support and fixed, energy storage, arc, moisture, mildew and protective conductor and the like. Second, insulated shoes Scope: The new standard specifies the electrical insulation shoes as in electrical work safety aids, as labor safety manager, should clearly understand this. Some electrical knowledge is often insufficient managers mistakenly believe 6KV insulating 5KV shoes or cloth insulated shoes, the application range is 6KV or 5KV environment, this is very wrong. Electrical safety management, the insulated tools are divided into basic safety equipment and auxiliary security appliances. The so-called basic safety equipment, means of sufficient strength to withstand insulation voltage electrical use safety equipment, such as insulated rod, clamp insulation, insulation station (ladder). The auxiliary security appliances, means insufficient withstand voltage electrical operation, electrical operation, with the basic safety equipment (such as insulation pads, insulated shoes) can not contact with live parts. But it can prevent step voltage for personal injury. Insulation insulation shoes shoes and cloth, mainly used in the frequency 1000V the following as a secondary security appliances. Third, pay attention: 1, insulation shoes suitable for AC 50Hz, at work or on the following 1000V 1500V dc electrical equipment, as a secondary safety equipment and labor protective equipment worn. Staff insulated leather shoes, and with the basic tools they touch live parts can be used to click protection step voltage caused by the step voltage means: Electrical equipment is grounded, the maximum potential gradient between the ground points of direction 0.8M potential difference. 2, the products that do not wet, do not use damp, once wet, put ventilation shade natural air-dry, avoid shoes deformation damage. After the sole is pierced foreign body, it can not be done using insulated shoes. 3, pay attention to the shoes of leather care, diligence shoe oil. Wipe way: first with a clean, soft cloth to wipe the surface dust shoes, shoe polish and then squeeze the cloth evenly coated in the upper, to be short (a little shoe polish dry) and wipe. 4, insulating shoes should not be worn in the rain, but not washed, or prone to breakage, degumming, bleaching, Pan efflorescence phenomenon. 5, the shoe is not in contact with the insulating oil, acid, alkaline substances and sharp, to prevent corrosion, deformation, damage. 6, color shoes (including white) wearing in particular should pay attention, you can not touch the water, dirt, tea stains, cola, etc., or they will leave a stain, making shoes primary damage. 7. dress shoes slight wrinkling, slight deformation phenomena is a normal phenomenon. 8. insulated shoes by moisture or sweat after the case, prone to flood efflorescence phenomenon. In case of pan-efflorescence phenomenon, gauze or cotton stick a small amount of warm water, wipe the white efflorescence on the upper, the shoes ventilated place to dry, then wipe with shoe polish, repeated several times to restitution. Therefore, to keep the shoes dry. 9. insulated shoes store, shoes should be kept clean, dry, and Shang Hao shoe polish, naturally flat: after a period of storage (especially during the rainy season) often make shoes ventilated cool dry, and re-wipe the shoe polish to prevent mildew.