Aqueous tackifying resin

The aqueous resin emulsion >>> Rosin Aqueous resin emulsion Product Introduction aqueous resin emulsion; also known as the water-based resin, the main component of premium rosin-modified resin. Aqueous tackifier resin emulsion;. Also known as waterborne resin, main components of superfine modified rosin resin quality indicators Specifications Index name SER-919 SER-939 Appearance milky milky 5-76-8 PH value Viscosity (cps) 500-1500 300- 1500 Solid content (%) 60 ± 2 55 ± 2 Features Features 1. light color, low odor, does not contain any solvents. Light colored, low odor and solvent free. 2. can greatly increase the pressure-sensitive tack. Improve the initial grab of PSA. 3. can fit a wide range of PH value added can be used in a neutral or slightly alkaline conditions. may be suitable for a wide range of pH value, adding in a neutral or weakly alkaline condition. 4. Adding significantly improve tack, peel strength and holding tack, and to achieve the best balance. After adding can obviously improve the initial bonding strength, peeling strength and cohesive force, and achieves the best balance point 5. small particle size;. Good mechanical stability. Small particle size;. Good mechanical stability 6. complete with water as solvent, non-VOC; nontoxic. Complete water as the solvent, does not contain VOC;. Environmental friendly Typical Uses The main purpose is widely used in terms of water-based adhesive, water-based adhesives, coatings, natural and synthetic rubber latex, the use of the products can reduce the original emulsion Production cost system without reducing its original performance, with good thickening effect and good compatibility. Widely used in water-based pressure-sensitive adhesive, water-based adhesive, water-based paint, natural and synthetic rubber latex and other aspects, the use of the series of products can reduce raw emulsion production cost without reducing its original performance, has good thickening effect and good compatibility plastic pail packaging Package: net weight 200 kg / barrel. Plastic barrels: net weight 200 kg / barrel 2. Technical indicators developed by the Company, subject to change, will be the implementation of the latest standards, and confirmed by contract. The technical standards are formulated and revised by us.If there are changes, the lastest standard will be executed and assuerd by contract.