Balance clay

[Features] ● This balance room temperature curing epoxy mastic; ● can be room temperature curing, curing rate is moderate; ● The product is thixotropic, heavy, easy to use, easy to blend, a good portion of the adhesive bond hardness, high strength, impact resistance, shock; ● curing acid and alkali resistance, moisture-proof waterproof, oil dustproof performance, good resistance to heat and atmospheric aging; ● cured with good insulation, compression, high bonding strength electrical and physical characteristics. The scope of application ● widely used in Wound rotor speed is lower than the motor windings or 30,000 rev / min, a balancing patch to the calibration of the role, with excellent adhesion strength; ● can be used for lifting motor , car motors, micro motors, DC motors and other products, has played bonding, sealing, embedded complement, seals and so on. [Appearance and physical properties] Model 101A 101B sticky clay-like appearance of the burnt body burnt clay-like color of blue sticky brown shelf life 25 ℃ 12 months 12 months Usage ratio A: B = 100: 100 (weight ratio or volume ratio) Use time 25 ℃ × 60 分钟 (100g mixed volume) Curing conditions 25 ℃ / 6-8 hours substantially cured (100g mixed volume) 72 hours to achieve the best adhesion strength ● To patch to the site should be dry oil, alcohol available when needed; ● take about the same amount of A, B two components clay, mix by hand until a uniform color, if the temperature is low, stiff clay clay can be preheated (about 30 ℃) becomes soft and then ; unbalance ● Press balancing instrument indicated his hand to his already good mix clay pasted unbalanced portion of the workpiece; ● curing process, please promptly clean containers and utensils used to avoid glue solidification in the appliance items. [Feature] after curing hardness SHORE D 90 after curing specific gravity 25 ℃ g / m3 2.2-2.4 Water absorption 25 ℃% 24 小时