Guangdong Dongguan Changan ordinary glass crystal uv shadowless glue bonding

Ordinary glass crystal uv bonding glue groups of plastic Features: uv light curing one-component acrylic resin structural adhesive, glue crystal clear, low odor, excellent workability, curing speed, colorless, transparent layer after curing, volume shrinkage, yellowing resistance and resistance to thermal resistance. Use of this product before use, the adhesive surface must be completely clean and dry surface after bonding glue close, hard pressed to make the glue evenly distributed bubbles side by side, placed wavelength ultraviolet light a few seconds to locate 320-380μm , remove the excess glue around and continue some time to reach the maximum illumination intensity. The higher the UV light intensity, the shorter the curing time. Technical Specifications: No. Appearance Viscosity cps Shore D hardness shear strength mpa typical use case main features 8207 adaptation amber transparent liquid 75,006,512 adapt glass / glass / metal bonding strength small area demanding applications. Used in small glass molding, assembly of crystal products is dry, low cost, moderate viscosity, small area and easy to operate. 8208 Amber transparent liquid 1506512 adaptation glass / glass / metal bonding and strength of a large area of ??less demanding applications. Modeling applied to medium-sized glass, crystal crafts assembly is dry, low cost, low viscosity, good fluidity and easy discharge bulbs. Note: 1, This product contains an acrylic resin and monomer, a slight skin and eye irritation, if accidentally splashed into the eyes, immediately rinse with plenty of water, as there does not need to go to hospital for examination, skin rinse immediately with soap and plenty of water after contact. 2, the product should be stored in a cool dry place, the remaining glue can not fall back to the original packaging. 3, the storage period: one year.