Shenzhen Green red plastic factory direct - Shenzhen Green red plastic factory wholesale - Shenzhen Green red plastic manufacturers supply

Translucent green and red AB glue (modified acrylic structural adhesive) the company's green and red plastic range: translucent, transparent. AB two doses are 100% solid ingredients, with rapid hardening time, good impact strength, heat resistance, a wide range: all kinds of metal or other material sticking to each other, such as: magnets, ceramics, Boli, resin, stone , handicrafts, electronics and so on. Technical Parameters Features: 1, two-component, modified acrylate adhesive. 2, room temperature curing speed, good workability. 3, strong impact resistance, heat resistance, toughness, good resistance to aging, water resistance is superior. 4, without any solvent in the formulation, after mixing hardened to a hundred percent solid ingredients. 5, mixing operation is simple, can be used with automated machine operations, improve production efficiency. Usage: 1, cleaning sticky surface moisture, dust, dirt, etc., to keep clean. 2, a large area of ??bonding, can be double-sided adhesive, a bonding surface coating agent A, B agent can be applied to the other side fit. 3, a small area bonding, can be applied to AB after mixing in the same adhesive surface, paste together two adhesive surface, or in an automated mixing device on plastic coating, laminating 3-5 minutes, ie obtain initial strength. 4, when the adhesive used to pay attention ventilated. 5, before or after the job is completed, to avoid mixing two doses AB, in order to avoid hardening